Bedienungsanleitung Metabo RS 17-125 (Seite 9 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600619

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH en

Original instructions

We declare under our sole responsibility: These

concrete grinders, identified by type and serial

number *1), comply with all relevant requirements of

the directives *2) and standards *3). Technical file

at *4) - see page 3.

When fitted with original Metabo accessories, the

machine is suitable for grinding and removing

concrete, screed and coatings with diamond cup

wheels.

Do not use for abrasive cutting-off operations,

roughing work, sanding, polishing or flap disc work.

The machine must not be used with water.

Note: The ring brush may stick when thermoelastic

materials are processed.

The machine is suitable for commercial use in trade

and industry.

Always use a suitable dust extraction system:

Connect a vacuum cleaner (M-class) to the

extractor connection piece (1).

The user bears sole responsibility for any damage

caused by improper use.

Generally accepted accident prevention regula-

tions and the enclosed safety information must be

observed.

For your own protection and for the

protection of your power tool, pay atten-

tion to all parts of the text that are marked

with this symbol!

WARNING – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety warn-

ings and instructions may result in electric shock,

fire and/or serious injury.

Keep all safety instructions and information for

future reference.

Pass on your electrical tool only together with these

documents.

General safety instructions for grinding:

Use

a) This power tool is designed for surface

grinding. Refer to all

safety warnings,

instruc-

tions, illustrations and specifications provided

with this power tool. Failure to follow all the

instructions may result in electric shock, fire and/or

serious injury.

b) This power tool is not suitable for routing,

polishing, sanding, working with roughing

discs, wire brushes, parting grinder discs or

flap discs. Using the power tool for tasks for which

it was not designed may create a hazard and cause

personal injury.

c) Do not use accessories that are not specifi-

cally designed and recommended by the tool

manufacturer. Just because an accessory can be

attached to your power tool does not mean safe

operation is guaranteed.

d) The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool. Accessories running faster than

their rated speed can break and fly apart.

e) The outside diameter and the thickness of

your accessory must be within the capacity

rating of your power tool. Incorrectly sized acces-

sories cannot be adequately protected or

controlled.

f) The arbour size of flanges, diamond cup

wheels or any other accessory must properly

fit the spindle of the power tool. Accessories with

arbour holes that do not match the mounting hard-

ware of the power tool will rotate unevenly, vibrate

excessively and may cause loss of control.

g) Do not use a damaged accessory. Before

use, always check accessories for splinters or

cracks and check grinding wheels for cracks or

signs of severe wear and tear. If a power tool or

accessory is dropped, inspect for damage or

install an undamaged accessory. After

inspecting and installing an accessory, posi-

tion yourself and bystanders away from the

plane of the rotating accessory and run the

power tool at maximum no-load speed for one

minute. Damaged accessories will normally break

apart during this test time.

h) Wear personal protective equipment.

Depending on the application, use a face

shield, safety goggles or safety glasses. As

appropriate, wear a dust mask, hearing protec-

tors, gloves and workshop apron capable of

stopping small abrasive or workpiece frag-

ments. The eye protection must be capable of stop-

ping flying debris generated by various operations.

The dust mask or respirator must be capable of

filtering particles generated by your operation.

Prolonged exposure to high intensity noise may

cause hearing loss.

i) Keep bystanders a safe distance away from

your work area. Anyone entering the work area

must wear personal protective equipment.

Fragments of a workpiece or broken accessory may

fly into the air and cause injury beyond the imme-

diate area of operation.

j) Hold power tool by insulated gripping

surfaces only, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. A cutting acces-

sory that comes in contact with a "live" wire may

1. Declaration of Conformity

2. Specified Use

3. General safety instructions

4. Special Safety Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo RS 17-125 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info