Bedienungsanleitung Metabo RS 17-125 (Seite 11 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600619

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH en

- The workplace must be well ventilated.

- The use of a dust mask of filter class P2 is recom-

mended.

Follow national requirements for the materials you

want to work with.

Material containing asbestos must only be treated

by specialists.

When working in dusty conditions, ensure that

ventilation openings are not blocked. If it becomes

necessary to remove dust, first disconnect the

power tool from the mains supply (use non-metallic

objects) and avoid damaging internal components.

Damaged, eccentric or vibrating tools must not be

used.

Avoid damage to gas or water pipes, electrical

cables and load-bearing walls (static).

Connect a FI circuit-breaker with max.

release current (30 mA) upstream when using the

machine outdoors.

Pull the plug out of the socket before making any

adjustments, converting or servicing the machine.

A damaged or cracked auxiliary handle must be

replaced. Never operate a machine with a defective

auxiliary handle.

A damaged or cracked safety guard must be

replaced. Never operate a machine with a defective

safety guard.

Only use accessories that are surmounted by

brushes of the safety guard.

See page 2.

1 Extractor connection piece

2 Threaded holes on gear housing (both sides)

3Thumb screws

4 Auxiliary handle

5Locking discs

62-hole spanner

7Adjusting nut

8Diamond cup wheel*

9Support flange

10 Spindle

11 Spring-mounted ring brush

12 Spindle locking button

13 Opening segment (for working close to walls)

14 Safety guard

15 Handle

16 Lock (to prevent the machine from being

switched on unintentionally, or for continuous

operation)*

17 Trigger (for switching on and off)

18 Slide switch (for

switching on/off) *

19 Electronic signal indicator

20 Speed adjustment wheel

* depending on equipment/not in scope of delivery

Before plugging in the machine, check that the

rated mains voltage and mains frequency, as

specified on the rating label, match your power

supply.

Australia: Always use a residual current device

(RCD) protected supply with a rated residual

current of 30 mA or less.

6.1 Attaching the auxiliary handle

Always work with the auxiliary handle attached

(4)! Attach the auxiliary handle as shown.

See illustration A on page 2.

- Fit locking discs (5) to the left and right of the gear

housing.

- Fit the auxiliary handle (4) on the gear housing.

- Insert the thumb screws (3) to the left and right of

the auxiliary handle (4) and turn gently.

- Adjust the auxiliary handle to the required angle

(4).

- Manually tighten the thumb screws (3) to the left

and right.

6.2 Dust extraction

Always use a suitable dust extraction system:

Connect an M-class vacuum cleaner to the

extractor connection piece (1).

For optimal dust extraction, use the connecting

sleeve 6.30796.

We recommend using an antistatic suction hose

with diameter 35 mm.

Disconnect the mains plug before changing

any accessories. The machine must be

switched off and the spindle must be at a standstill.

7.1 Locking the spindle

Press in the spindle locking knob (12) only

when the spindle is stationary!

- Press in the spindle locking button (12) and turn

the

spindle (10) by hand until you feel the spindle

locking button engage.

7.2 Fitting/removing the diamond cup wheel

See illustration B on page 2.

To fit:

- Fit the support flange (9) on the spindle. (10) The

flange should not turn on the spindle when prop-

erly attached.

- Lay the diamond cup wheel (8) on the support

flange (9) so that it lies flat along the support

flange.

- The two sides of the clamping nut (7) are different.

Screw the clamping nut onto the spindle so that

the band of the clamping nut (7) is facing upward.

- Lock the spindle (see chapter 7.1). Turn the

clamping nut (7) clockwise using the 2-hole

spanner (6) to secure.

5. Overview

6. Initial Operation

7. Attaching the accessory

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo RS 17-125 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info