Bedienungsanleitung Metabo SM 5-55 (Seite 13 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595109

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

ENG

use a Pozidriv screwdriver bit.

e) If you are unable to insert screws to the required

depth, adjust the adjusting ring (9) until the

screw depth is correct.

f) Make sure that the screwdriver bit is attached

correctly (read the screwdriver Operating

Instructions). There should be no gap between

the adapter (2) and the screwdriver casing.

g) If you notice that the screw strip (11) is not

being fed in correctly (screws do not appear or

are missing), make sure that you push back the

depth stop (7) all the way and then move a suffi-

cient distance from the workpiece to allow the

depth stop to return to its original position.

The screwdriver magazine will only fill correctly

if the depth stop is pushed back completely. Do

not set the tool down on the depth stop (7) as

this may feed in screws unintentionally.

h) If you are unable to insert the sliding piece (6)

fully into the casing, check that the two screws

(8) are screwed in all the way.

i) Hold the tool at right angles to the work surface.

The screw will not be inserted deep enough if

the tool is held at an angle that deviates from

90° even slightly.

Recommended maintenance intervals:

Daily:

Check the screwdriver magazine for damage and

clean using compressed air (wear protective

goggles).

Weekly (see illustration on page 4):

When removing, remember that the sliding piece

(6) is spring-loaded.

- Push in the sliding piece (6) slightly, hold in this

position and then unscrew the screw (with roller)

(14).

- Remove the sliding piece (6), pressure spring

(16) and spring guide (15) from the casing and

clean using compressed air (wear protective

goggles).

- Remove heavy dirt deposits manually without

using aggressive cleaning agent.

- Do no lubricate individual components.

- Assemble in reverse order.

Monthly (see illustration on page 4):

In addition to weekly cleaning:

- Force out the pin (18) from left to right and

remove.

- Unscrew the crosshead screw (17) and remove

the socket retained by the crosshead screw (17).

- Remove the ratchet wheel unit (19).

- Clean the sliding piece (6) and ratchet wheel unit

(19) using compressed air (wear protective

goggles).

- Remove heavy dirt deposits manually without

using aggressive cleaning agent.

- Assemble in reverse order while lubricating

ratchet wheels with dry lubricant (such as

graphite).

Use only genuine Metabo accessories.

If you need any accessories, check with your

dealer.

For dealers to select the correct accessory, they

need to know the exact model designation of your

tool.

See page 4.

A Screwdriver bit

(with safety lock)

For a complete range of accessories, see

www.metabo.com or the main catalogue.

Repairs should be carried out by Metabo or an

authorised customer service workshop. Only

genuine spare parts may be used.

Any Metabo power tool in need of repair can be

sent to one of the addresses listed in the spare

parts list.

Please enclose a description of the fault with the

power tool.

Metabo's packaging can be 100% recycled.

Scrap power tools and accessories contain large

amounts of valuable resources and plastics that

can be recycled.

These instructions are printed on chlorine-free

bleached paper.

Explanatory notes on the specifications on page 2.

Changes due to technological progress reserved.

Weight

0.5 kg

Compatible screw types, in screw strip:

Plaster-

board screws

Chipboard screws

Steel roofing screws

9 Cleaning, Maintenance

10 Accessories

11 Repairs

12 Environmental Protection

13 Technical Specifications

17026885_1211 SM 5-55.book Seite 13 Mittwoch, 14. Dezember 2011 11:28 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SM 5-55 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info