Bedienungsanleitung Metabo SSW 650 (Seite 8 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600622

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISHen

Original instructions

We declare under our sole responsibility: These

impact drivers, identified by type and serial number

*1), comply with all relevant requirements of the

directives *2) and standards *3). Technical file at *4)

- see page 3.

The impact screwdriver is suitable for driving in and

removing screws.

The user bears sole responsibility for any damage

caused by improper use.

Generally accepted accident prevention regula-

tions and the enclosed safety information must be

observed.

For your own protection and for the

protection of your power tool, pay atten-

tion to all parts of the text that are marked

with this symbol!

WARNING – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety warn-

ings and instructions may result in electric shock,

fire and/or serious injury.

Keep all safety instructions and information for

future reference.

Pass on your electrical tool only together with these

documents.

Hold the power tool by insulated gripping

surfaces only, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. A cutting acces-

sory that comes in contact with a "live" wire may

render exposed metal parts of the power tool "live"

and give the operator an electric shock.

Pull the plug out of the plug socket before any

adjustments, conversions or servicing are

performed.

Ensure that the spot where you wish to work is free

of power cables, gas lines or water pipes (e.g.

using a metal detector).

Only screwdriving bits suitable for the impact screw-

driver must be used.

Take care when driving in long screws - risk of slip-

ping.

Mount the machine on the screw only when it is

switched off.

The workpiece must lay flat and be secured against

slipping, e.g. using clamps. Large workpieces must

be supported adequately.

Wear ear protectors when working for long

periods of time. High noise levels over a

prolonged period of time may affect your hearing.

Materials that generate dusts or vapours that may

be harmful to health (e.g. asbestos) must not be

processed.

See page 2.

1 Square attachment for 1/2“ tools

2 Rotation selector switch / Transporting safety

device

3Trigger

Before plugging in the device, check to see

that the rated mains voltage and mains

frequency, as specified on the rating label, match

your power supply.

Australia: Always use a residual current device

(RCD) protected supply with a rated residual-

current of 30 mA or less.

6.1 Setting the direction of rotation, engag-

ing the transporting safety device

(switch-on lock)

Do not actuate the rotation selector switch or

engage the transportation lock (2) unless the

motor has stopped completely!

Actuate the rotation selector switch / Engage the

transportation lock (2)

R = Right rotation set

(insert screws)

L = Left rotation set

(remove screws)

0 = Central position: transportation lock setting

(switch-on lock)

6.2 Switching on and off

Switching on: press the trigger switch (3).

Switching off: release the trigger switch (3).

6.3

Speed

/ Tightening torque

The speed and tightening torque are connected

directly. The lower the speed, the lower the tight-

ening torque.

The speed and tightening torque can be adjusted

steplessly by pressing the trigger (3) firmly or lightly,

thus adapting to working conditions.

Recommendation: determine the correct setting

by carrying out trial screwdriving.

6.4 Changing the screwdriving bit

The screwdriving bit used must match the

screw.

Damaged screwdriving bits must not be used.

1. Declaration of Conformity

2. Specified Use

3. General safety instructions

4. Special Safety Instructions

5. Overview

6. Initial Operation/Setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SSW 650 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info