Bedienungsanleitung Metabo SSW 650 (Seite 9 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600622

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH en

For machines WITHOUT locking pin in the

spindle

Inserting the screwdriving bit: Fit the tool on the

square attachment until the limit stop (1) .

Removing the screwdriving bit: Remove the tool

from the square attachment (1) .

For machines WITH locking pin in the spindle

Use only screwdriving bits with a lateral drilled

hole (a). Only like this will the screwdriving bit

be retained by the locking pin (b).

Inserting the screwdriving bit:

- Align the tool and spindle such as the locking pin

(b) at the spindle and the drilled hole (a) at the tool

can be interlock after the fitting.

- Press in the locking pin (b) and keep pressed.

- Fit the tool on the square attachment until the limit

stop (1) .

- Make sure that the guard is placed securely.

Removing the screwdriving bit: Press in the

locking pin (b) with an appropriate object and

remove the tool from the square attachment (1) .

Mount the machine on the screw, ensuring it is

aligned straight.

The screwdriving process has two elements:

inserting the screw and

tightening the screw with the percussion mech-

anism.

The tightening torque depends on the impact dura-

tion.

With

an impact duration of approx. 5 seconds, the

maximum tightening torque has been reached.

The torque curve depends on the type of applica-

tion:

With a hard screwdriving application (screw-

couplings in hard material such as metal), maximum

tightening torque is already reached after a short

impact duration (a).

With a soft screwdriving application (screw-

couplings in soft material such as wood), a longer

impact duration (b) is required.

Recommendation: determine the correct impact

duration by carrying out trial screwdriving.

Caution! With small screws, maximum torque can

be reached even below an impact duration of 0.5

seconds.

- This is why the duration of the screwdriving

process must be monitored exactly.

- Adjust the tightening torque by pressing firmly or

lightly on the trigger (3), ensuring that the screw is

not damaged or that the screw head does not tear

off.

Use only genuine Metabo accessories.

Use only accessories that fulfil the requirements

and specifications listed in these operating instruc-

tions.

See page 4.

A Screwdriving bits

B1/2“ tool

For a complete range of accessories, see

www.metabo.com or the catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline 2002/

96/EC on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately and

handed in for environmentally compatible recycling.

Explanatory notes on the specifications on page 3.

Changes due to technological progress reserved.

=No-load speed

s=Impact frequency

H =Machine tool attachment

m =Weight (with smallest battery pack)

7. Use

8. Accessories

9. Repairs

10. Environmental Protection

11. Technical specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SSW 650 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info