Bedienungsanleitung Metabo TS 254 (Seite 17 von 188) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

633940

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

ENGLISH

WARNING – Reading the operat-

ing instructions will reduce the

risk of injury.

WARNING - Read all safety warnings

and instructions. Failure to follow all

safety warnings and instructions may re-

sult in electric shock, fire and/or serious

injury.

Keep all safety instructions and in-

formation for future reference. Pass

on your power tool only together with

these documents.

– These instructions are intended for

persons having a basic technical

knowledge of the operation of ma-

chines such as the one described

herein. If you have no experience

whatsoever, we strongly recom-

mend to seek the advise of an expe-

rienced person.

– The equipment manufacturer is not

liable for any damage resulting from

neglect of these operating instruc-

tions.

Information in these operating instruc-

tions is categorised as shown below:

Danger!

Risk of personal injury

or environmental dam-

age.

Risk of electric shock!

Risk of personal injury

by electric shock.

Drawing-in/trapping

hazard!

Risk of personal injury

by body parts or cloth-

ing being drawn into the

rotating saw blade.

Caution!

Warning against proper-

ty damage.

Note:

Additional information.

3.1 Specified Use

This machine is intended for ripping and

crosscutting grown timber, faced

boards, chip board and wood-core ply-

wood sheets, and similar wood-derived

materials.

Metals can only be cut with the following

restrictions:

– With suitable saw blade only

(see “Available Accessories”)

– Non-ferrous metals only

(no hard or hardened metals)

Do not cut round stock without suitable

jigs or fixtures. The rotating saw blade

could turn the workpiece.

When sawing thin stock laid on its edge,

a suitable guide must be used for firm

support.

The tool must not be used for grooving

and slot cutting without a suitable guard.

Do not use circular saws for slitting

(groove ended in workpiece)

Any other use is considered to be not as

specified and not allowed. The manu-

facturer is not liable for any damage

caused by unspecified use.

Modification of the machine or use of

parts not approved by the equipment

manufacturer can cause unforeseeable

damage!

3.2 General safety instruc-

tions

Caution! When using power tools, the

following basic safety measures must

be taken to protect against electric

shock, other injury or fire.

 When using this tool observe the fol-

lowing safety instructions, to exclude

the risk of personal injury or material

damage.

 Please also observe the special

safety instructions in the respective

chapters.

 Where applicable, follow the legal

directives or regulations for the pre-

vention of accidents pertaining to

the use of circular saws.

General hazards!

 Keep your work area tidy – a messy

work area invites accidents.

 Be alert. Know what you are doing.

Set out to work with reason. Do not

operate tool while under the influ-

ence of drugs, alcohol or medica-

tion.

 Consider environmental conditions:

keep work area well lighted.

 Prevent adverse body positions. En-

sure firm footing and keep your bal-

ance at all times.

 Use suitable workpiece supports

when cutting long stock.

 Never use power tools in areas

where there is a risk of fire or explo-

sion.

 The saw shall only be started and

operated by persons familiar with

circular saws and who are at any

time aware of the dangers associat-

ed with the operation of such tool.

Persons under 18 years of age shall

use this tool only in the course of

their vocational training, under the

supervision of an instructor.

 Keep bystanders, particularly chil-

dren, out of the danger zone. Do not

permit other persons to touch the

tool or power cable while it is run-

ning.

 Do not overload tool – use it only

within the performance range it was

designed for (see “Technical Speci-

fications”).

Danger! Risk of electric shock!

 Do not expose tool to rain.

Do not operate tool in damp or wet

environment.

Prevent body contact with earthed

objects such as radiators, pipes,

cooking stoves, refrigerators when

operating this tool.

 Do not use the power cable for pur-

poses it is not intended for.

Risk of personal injury and

crushing by moving parts!

 Do not operate the tool without in-

stalled guards.

 Always keep sufficient distance to

the saw blade. Use suitable feeding

aids, if necessary. Keep sufficient

distance to driven components

when operating the power tool.

 Wait for the saw blade to come to a

complete stop before removing cut-

offs, scrap, etc. from the work area.

 Do not attempt to stop the saw blade

by pushing the workpiece against its

side.

 Ensure the tool is disconnected from

power before servicing.

 Ensure that when switching on (e.g.

after servicing) no tools or loose

parts are left on or in the tool.

2. Please Read First!

3. Safety

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo TS 254 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info