Bedienungsanleitung Metrix MX 26 (Seite 7 von 18) (Englisch)

598210

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Chapter II

5000-count portable digital multimeter, with current inputs

1.2. Protection mechanisms

This instrument is fitted with various protection mechanisms :

∗ Varistor protection for limiting transients of over 1100 V at the VΩ terminal,

particularly 6 kV pulse streams as defined by the French standard IEEE 587.

∗ A PTC (positive temperature coefficient) resistor protects against permanent

overvoltages of up to 600 V during resistance, capacitance, continuity and diode test

measurements. This protection is reset automatically after overload.

∗ Two HBC fuses provide protection up to 600 V during measurements of intensity

type.

∗ An IP protection rating of 40.

∗ Maximum protection beteen mA and 10 A input terminals : 500 V.

1.3. Safety mechanisms

∗ The battery unit cannot be accessed without first disconnecting the measuring leads.

∗ When measuring voltages above 24 V, the sign blinks

on the display.

∗ When measuring voltages above 10 A, the sign blinks

on the display and an

intermittent audible signal warns the user.

∗ If the maximum range is repeatedly exceeded, an intermittent audible signal warns

the user in volt (DC and AC+DC) and current (DC and AC+DC) functions.

1.4. Warranty

This equipment is warranted against any defects of manufacture or materials according to

the general conditions of sale.

During the warranty period (3 years), defective parts will be replaced, the manufacturer

reserving the right to repair or replace the product. In the event of the equipment being

returned to the distributor or to a local agency, carriage to the centre shall be payable by

the customer. The warranty does not cover the following :

Repairs necessitated by misuse of the equipment or use in association wi

incompatible equipment.

Modification of the equipment or any related software wi

thout the explicit authorization

of the manufacturer.

Repairs necessitated by attempts to repair or maintain the product made by

a person

not approved by

the manufacturer.

Adaptation to a specific application not provided for

in the specifications of the

equipment or the user manual.

5. Damage after a drop, a shock or flooding.

1.5.

Maintenance and metrological verification

Return your instrument to your distributor for any work to be done within or outside the

guarantee.

1.6. Unpacking - Repackaging

This equipment has been fully checked out mechanically and electrically before shipping.

All precautions have been taken to ensure that the instrument arrives at its destination

undamaged. However, it is advisable to carry out a rapid check for damage sustained in

shipping. If there is any evidence of damage, make this known immediately to the shipper.

* Should you need to return the multimeter, preferably use the original packaging and

indicate the r

easons as clearly as possible on an accompanying note.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metrix MX 26 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Metrix MX 26

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info