598210
8
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
Chapter II
5000-count portable digital multimeter, with current inputs
19
2. DESCRIPTION
This compact multimeter is a self-contained with an appropriate mechanical construction,
enables hand-held version, with a protective elastomer case. It is designed for a high
degree of user safety, maximum protection and unrivalled performance.
2.1. Selector switch
This multimeter is a standalone, hand-held professional measuring instrument, capable of
measuring the following quantities (accessed by the twelve-position rotary selector switch):
AC voltages with AC (or RMS) capacitive coupling (Input impedance : 500
kΩ)
AC voltages with AC+DC (or TRMS) direct coupling
DC voltages
DC / AC+DC voltages, range 500 mV
AC currents with AC+DC (or TRMS) direct coupling
DC currents
resistance values
continuity (with beeper)
capacitance
diode threshold voltage
frequencies
2.2. Keypad
A four-key keypad lets you :
select the autoranging mode (RANGE / AC+DC key)
store a value (MEM key)
activate the positive or negative peaks (Pk +/- key)
select a function derived from the main function, or switch on the multimeter again
after it has been shut down automatically (RANGE / AC+DC key)
activate back lighting of the display unit ( key)
activate the RS232 link (Pk +/- and keys + switch to OFF).
2.3. Display
This multimeter display provides :
5 000-count measurements (50 000-count Hz-measurement),
function indicator (V, A, AC+DC, F, Hz,
, Ω, , AUTO, MEM, ) and
multiplicator (n, µ, m, k, M),
battery discharged indicator BAT : approximately 12 hours of operation,
clearly legible figures (11 mm high),
an analogue readout of the parameter being measured through a 34-segment
bargraph,
validation of the RS232 interface.
Display backlight when required in poor lighting conditions. Automatic switch-off.
2.4. Power supply
This multimeter is powered by a standard 9 V battery (6LF22) which provides
approximately 500 hours of operation (on function V
DC).
2.5. Input terminals
Measurements are performed using two measuring leads supplied with the instrument
connected to input terminals 1, 2, 3 and 4, as indicated in section 3.1.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Metrix MX 26 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Metrix MX 26

Metrix MX 26 Bedienungsanleitung - Deutsch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info