14
Re-setting the Receiver (RESET)
By re-setting your receiver, all modifications will be lost: it will re-set the original parameters (when
the receiver leaves the factory).
CAUTION! All your modifications will be lost (favourite channels etc).
To re-set the receiver:
- Press Menu / Tools / Default Value.
- Enter the password (0000) and wait.
USING THE RECEIVER WITH A VCR
Simply connect the receiver to your VCR via the VCR SCART socket of the receiver. To record satel-
lite programs, you must be viewing the channel you wish to record. To start the recording, go to the
AV channel of your VCR (0, AV, EXT etc): refer to your VCR manual.
To view a video, simply press PLAY: the VCR has priority over the receiver. If this is not the case,
press the TV/VCR key of your VCR remote.
IN CASE OF A PROBLEM
Your screen shows ‘NO SIGNAL’.
The channel that you wish to view does not exist or has changed parameters (frequency etc). Refer
to a specialist review magazines (Eurosat for example) to double-check the channel parametres.
Your antenna is pointed towards a satellite with the same frequencies as the ones of the channel
you wish to view.
The motor is working and the antenna is moving.
The antenna is not orientated correctly and therefore no signal is received.
The screen remains black on one or more channels
The channel you wish to view is probably crypted.
The receiver is requesting a password to view a channel.
Enter ‘0000’ if the password has not been modified yet. If you have forgotten the password
you should re-set the receiver.
F
9
8
