Bedienungsanleitung Metz Mecablitz 45 CL-4 digital BASIC-KIT (Seite 55 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

517330

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

range. The subject should be located in the middle third of the indicated ran-

ge to give the electronic circuit leeway for compensation.

We recommend the camera mode aperture priority (A, Av) or manual (M).

Automatic setting of the ISO value and aperture

The aperture and ISO sensitivity of the camera can be automatically set on

the flash unit when the latter is operated with an adapter from the SCA 3002

system:

The automatic setting range for ISO extends from ISO 6 to ISO 6400.

The automatic setting range for the aperature extends from f/1.0 to

f/45 (at ISO 100 / 21°), including all the in-between values.

• Equip the flash unit with the connecting cable SCA 3045

and appropria-

te adapter from the SCA 3002 system and connect to the camera.

• On the flash unit, set any auto working aperture with the setting mark for

aperture pre-selection ተ.

• Switch on the flash unit and the camera.

• Lightly touch the camera’s shutter release so that data can be exchanged

between the camera and the flash unit.

• Continue depressing the ”Mode” key ቭ until “A” and “ “appear on the

indicator window. When the camera’s shutter release is lightly touched the

flash unit automatically takes over the data for the aperture and ISO setting

from the camera. The values for auto working aperture and ISO manually

adjusted on the flash unit are irrelevant in this context.

For manual adjustment of the ISO and aperture (e.g. with fill-in flash)

continue depressing the “Mode” key ቭ until only “A” is displayed on

the display window.

6.2 TTL flash mode

In TTL flash mode the camera’s sensor measures through-the-lens (TTL) the

light reflected by the subject. This means that light measurement also takes

mounted filters into account. When an adequate amount of light has been

reached the camera’s electronic circuit switches off the flash by way of the

SCA adapter.

☞

Setting procedure

• Equip the flash unit with the connecting cable SCA 3045

and a suitable

adapter from the SCA 3002 system and connect to the camera. Adapters

of the SCA 300 system can be connected to the flash unit with the connec-

ting cable SCA 3045

or the connecting cable SCA 300A.

• Adjust TTL on the flash unit with the setting mark for aperture pre-selection

ተ.

• Switch on the flash unit and the camera. “TTL” is displayed on the indicator

window.

The maximum flash range can be read off directly from the aperture calcula-

tor under the f-stop when the ISO value of the camera or film has been

manually set on the flash unit. The shortest shooting distance is approx. 10%

of the maximum flash range. The subject should be located in the middle

third of the indicated range to give the electronic circuit leeway for compen-

sation.

The aperture or ISO value does not have to be set on the flash unit for

the TTL flash mode to function!

6.3 TTL flash mode with preflash

In TTL flash mode with preflash the reflective properties of the subject are

established with one or more preflashes prior to exposure and evaluated by

the camera’s electronic circuit. The distance data from the camera’s AF sys-

tem can be additionally taken into account. Light output control by the

camera’s electronic system is via an adapter from the SCA 3002 system. The

preflash mode is selected with the ‘”Mode” key ቭ.

Many modern camera models, but particularly many digital cameras,

only support the TTL flash mode with preflash (e.g. Canon E-TTL,

Minolta ADI, Nikon D-TTL, Nikon iTTL etc.). These are further develop-

ments of the standard TTL flash mode which is not supported by these

cameras. For further details please refer to the camera’s operating

instructions.

☞

708 47 0026-A1 BASIC-KIT 14.10.2008 12:54 Uhr Seite 55

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metz Mecablitz 45 CL-4 digital BASIC-KIT Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info