Bedienungsanleitung Metz Mecablitz 45 CL-4 digital BASIC-KIT (Seite 57 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

517330

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

• Adjust the setting mark for aperture preselection ተ at TTL.

• Switch on the flash unit with the main switch. The slave mode is automati-

cally activated. The AF auxiliary light in the connecting cable SCA 3045

flashes additionally when flash readiness is reached.

Please note that the mecablitz 45 CL-4 digital only supports the remote

channel “Ad1” of the controller! For further details relating to the slave

mode please refer to the operating instructions for the slave adapter!

7 Bounce flash

Bounce flash illuminates the subject more softly and dense shadows are dimi-

nished. Moreover, the physically conditioned decline of light from the fore-

ground to the background is reduced.

The main reflector ቢ of the flash unit can be swivelled horizontally and verti-

cally for bounce flash. To avoid colour cast bounce the flash off a colour-neu-

tral or white surface. The secondary reflector ቧ can be additionally activa-

ted with the switch ቮ for fill-in frontal lighting.

Please note that bounce flash reduces the maximum flash range!

8 Illumination

The main reflector ቢ and the secondary reflector ቧ cover focal lengths as of

35mm. The wide-angle diffuser (45-42) (included with the flash unit) widens

the illumination of the main reflector for focal lengths as of 28mm (35 mm

format in all cases). The wide-angle diffuser diminishes the guide number,

and thus the maximum flash range, by approx. 30%. This is automatically

adapted by the aperture calculator on the flash head.

9 Fill-in flash

9.1 TTL fill-in flash

Most camera models automatically support the TTL fill-in flash control when

in Program or Auto Mode. Various camera models additionally feature spe-

cial TTL fill-in flash programmes that can be activated on the camera (see the

operating instructions for the given camera and SCA adapter).

☞

9.2 Automatic fill-in flash

When in automatic fill-in flash mode the auto working aperture of the flash

unit is opened by approx. one stop increment further than the f-stop set on

the camera.

We suggest setting the camera in the aperture priority mode (e.g. A,

Av) or in manual mode M. When an adapter from the SCA 3002 sys-

tem is being used then manual aperture setting must be selected on the

flash unit if corrections cannot be entered on the camera!

Example:

The aperture f/5.6 has been set on the camera. The aperture f/4 is manually

set on the flash unit for fill-in flash.

With an adapter from the SCA 3002 system and an appropriate camera a

correction value of approx. 1 f-stop is set on the camera for the flash during

automatic data transfer (ISO, aperture). An additional setting on the flash

unit is then not necessary!

10 Exposure corrections

Extreme contrast differences between subject and background can confuse

the automatic exposure system of the camera or flash unit. This can be com-

pensated by manual exposure correction.

Exposure correction in TTL flash mode must be set on the camera (see opera-

ting instructions for the given camera):

Dark subject against a bright background:

Positive correction value (approx. +1 to +2 f-stops).

Bright subject against a dark background:

Negative correction value (approx. -1 to -2 f-stops).

An f-stop which differs from the camera aperture is set manually on the flash

unit for Exposure correction in automatic flash mode.

Dark subject against a bright background: Set on the flash unit an f-stop that

is higher by one increment: e.g. camera aperture f/4; auto working aperture

on the flash unit f/5.6.

☞

708 47 0026-A1 BASIC-KIT 14.10.2008 12:54 Uhr Seite 57

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metz Mecablitz 45 CL-4 digital BASIC-KIT Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info