Bedienungsanleitung Metz MECABLITZ 48 AF-1 digital Nikon (Seite 77 von 139) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

517332

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

In TTL flash modes, manual flash exposure correction factors of from -3 EV (f–stops)

to +3 EV (f-stops) can be adjusted on the flash unit in one-third increments.

Tip:

Dark subject against light background: positive correction factor. Light subject

against dark background: negative correction factor.

Exposure correction by means of alteration of the lens aperture setting is

impossible, since the camera’s automatic exposure program regards the

altered aperture setting as the normal working aperture setting. When

setting the correction factor, the distance shown in the display can chan-

ge and be adjusted to the correction factor (depending on the camera

model)!

Setting procedure

• Press button ( - ) or ( + ) until „EV“ flashes. Apply the setting wished with the

buttons ( + ) and ( - ):

Set a negative correction factor with the button ( - ) or a positive one with the

button ( + ).The setting takes effect immediately. After about 5 seconds the

display stops flashing and the setting is saved automatically. After saving,

„EV“ appears in the display with the correction value set in place of the aper-

ture factor.

Press the button ( - ) or ( + ) until „EV“ without a correction factor is shown. The

setting takes effect immediately. After about 5 seconds the display stops flashing

and the setting is saved automatically. After saving the aperture factor appears

once again.

Manual flash exposure correction is only possible in TTL flash mode if the

camera supports this function (consult the camera’s operating instruc-

tions)! If the camera does not support this function, the adjusted correc-

tion will have no effect.

For some camera models, the manual flash exposure corrections must be adju-

sted on the camera. If this is the case, no correction value will appear on the

flash unit display.

☞

After the shot, remember to cancel the TTL flash exposure correction in the

camera!

9 Special functions („Select“)

Depending on the camera model or camera group (see Table 1), various special

functions are available. For this purpose, data exchange must first occur bet-

ween the flash unit and camera to access and set the special functions, for

example by tapping the shutter release. Accessing the individual special func-

tions is achieved with the button „Select“, that is to say, the buttons ( - ) or ( + )

must be pressed simultaneously. The accompanying special functions and set-

tings desired are then carried out individually with the button ( - ) or ( + ).

The setting must occur immediately after accessing the special functions

since otherwise the flash unit automatically switches back to normal

flash operation after a few seconds!

9.1 Motor zoom main reflector („Zoom“)

The motor zoom main reflector ቫ of the flash unit can illuminate lens angles

from 24 mm (35 mm format): Thanks to the use of the integrated wide-angle

diffuser ቩ, the illumination widens to 18 mm.

Auto zoom

When the flash unit is operated with a camera from Groups B, C, D or E and a

lens with CPU, the zoom position of the main reflector ቫ adjusts automatically

to the lens focal length. After switching on the flash unit, „Zoom“ appears in the

display and the current zoom position of the main reflector ቫ appears.

Automatic adjustment occurs for lens focal lengths from 24 mm. If a focal length

of less than 24 mm is used, „24“ flashes in the display as a warning that the

shot cannot be completely lit.

If so desired, the position of the main reflector ቫ can be manually adjusted in

order to achieve particular lighting effects (such as spot effect etc.).

☞

707 47 0081.A2 48AF-1Nikon/Inh. 19.09.2007 12:42 Uhr Seite 77

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metz MECABLITZ 48 AF-1 digital Nikon Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info