Bedienungsanleitung Metz MECABLITZ 48 AF-1 digital Nikon (Seite 76 von 139) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

517332

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

Setting procedure

• Press „Mode“ ባ until „ BL“ flashes in the display.

The setting takes effect immediately. After about 5 seconds the display stops

flashing and the setting is saved automatically. „ BL“ appears in the

display.

Some cameras do not support the matrix-controlled fill-in flash mode in

combination with SPOT exposure metering! This flash mode ( „ BL“)

will then either be automatically cancelled or cannot be activated in the

first place! In these cases, the normal TTL flash mode will be set.

TTL flash mode

This analogue TTL flash mode is supported by cameras from Groups A, B and C

(see Table 1). It is the normal TTL flash mode (TTL flash mode without preflash)

for analogue cameras and/or various digital compact cameras.

Setting procedure

• Press „Mode“ባ until „ “ flashes in the display.

The setting takes effect immediately. After about 5 seconds the display stops

flashing and the setting is saved automatically. „ “ appears in the display.

Automatic TTL fill-in flash mode

In most camera models the automatic TTL fill-in flash mode is activated in the

automatic program P and in the vari- and subject programs (see camera’s ope-

rating instructions).

Fill-in flash mode overcomes troublesome shadows and produces a more balan-

ced exposure between subject and background with contre-jour shots. The

camera’s computer-controlled metering system sets the most suitable combina-

tion of shutter speed, aperture and flash output.

Ensure that the contre-jour light source does not shine directly into the

lens, as this will interfere with the camera’s TTL metering system!

There is no setting or display for automatic TTL fill-in flash in the flash unit.

☞

TTL

☞

TTL

7.2 Manual flash mode

In the manual flash mode , the flash unit emits the full uncontrolled amount

of light if no partial light output has been selected. The specific photographic

situation can be taken into account by adjusting the aperture setting or by selec-

ting a suitable manual partial light setting. The setting area ranges from P 1/1

to P 1/128 in M mode and P1/1 - P1/32 in M-HSS mode. The display shows

the distance at which the subject is correctly lit (see 5.2).

Setting procedure

• Press „Mode“ባ until „ “ flashes in the display.

The setting takes effect immediately. After about 5 seconds the display stops

flashing and the setting is saved automatically. „ “ appears in the display.

Manual partial light output levels

In manual flash mode set the partial light output desired with the buttons (

+ ) and ( - ). The setting takes effect immediately and is saved automatically. The

distance display is adjusted to the partial light output automatically (see 5.2).

Various camera models support the manual flash mode only in the

camera mode manual M! In other camera models an error message

appears in the display and the release is locked (see 5.4)!

8 Manual flash exposure correction

The auto flash exposure mode of most cameras is adjusted to a reflection factor

of 25% (the average reflection factor of flash subjects). A dark background that

absorbs much of the light or a highly reflective bright background (backlit shots,

for example) may result in, respectively, underexposure or overexposure of the

subject.

To offset these effects, the flash exposure can be adjusted manually for the shot

with a correction value. The extent of the correction depends on the contrast bet-

ween the subject and background!

☞

707 47 0081.A2 48AF-1Nikon/Inh. 19.09.2007 12:42 Uhr Seite 76

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metz MECABLITZ 48 AF-1 digital Nikon Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info