Bedienungsanleitung Metz MECABLITZ 54 AF-1 Minolta (Seite 56 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

517350

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Settings on the camera

Set your camera to Program “P” or a Subject Program Mode (such as Land-

scape, Portrait, Sports, etc.). Select the autofocus mode “Single-AF (S)” on

the camera. Please refer to the camera’s operating instructions for the setting

procedure.

Use a tripod for the „Night Shots Program“ to avoid the danger of

camera shake in connection with slow shutter speeds!

Settings on the flash unit

Set the „TTL“ mode on the flash unit (see 4.1).

Some cameras automatically switch the flash unit to TTL flash mode

when in Program “P” or a Subject Program Mode.

Having completed the above settings, problem-free flash photography can

commence as soon as the flash unit indicates flash readiness (see 5.1).

Please observe the hints given for PA and PS program control in sec-

tion 6.1.

4. Operating modes of the flash unit

4.1 TTL flash mode (Fig. 3)

For the digital cameras Dimage 5, 7 and 7i please refer to the hints

given in section 4.2 and 4.3.

The TTL flash mode is a very simple way to achieve excellent flash shots. In

this mode exposure readings are taken by a sensor built into the camera,

which measures the light reaching the film through the camera lens. The elec-

tronic control circuit within the camera transmits a stop signal to the flash unit

as soon as the film has been exposed by the correct amount of light, thereby

instantly interrupting the flash. The advantage of this flash mode is that all fac-

tors influencing correct exposure of the film (filters, change of aperture and

focal length with zoom lenses, extensions for close-ups, etc.) are automatically

taken into account. You need not worry about the flash, the camera’s electro-

nic system automatically determines the correct amount of flash light required.

For the maximim flash range please observe the distance given in the LC dis-

☞

play of the flash unit (see 5.4). If flash exposure was correct, the LC display of

the flash unit indicates „o.k.“ for about 3 sec. (see 4.1.3).

The TTL flash mode is supported by all camera modes (such as Program “P”,

Aperture Priority Mode “A”, Shutter Priority Mode “S”, Subject Program

Modes, Manual Mode “M”, etc.).

To test the TTL function a film must be loaded in the camera. When

selecting the film please check whether limits regarding maximum film

speed or ISO value (e.g. maximum ISO 1000) are applicable to the

given camera when in TTL mode (refer to the camera’s operating in-

structions)!

Setting procedure for TTL mode

Various cameras automatically activate TTL flash operation on the

flash unit when in Program “P” or a Subject Program Mode.

• Turn on the flash unit by its main switch.

• Continue depressing the „Mode“ key until „TTL“ flashes on the LC display.

• The setting becomes immediately effective. The LC display returns to its nor-

mal state after approx. 5 sec.

Pronounced differences in contrast, e.g. a dark subject in snow, may make it

necessary to correct the exposure settings (see 4.1.2).

4.1.1 Automatic TTL fill-in flash in daylight (Fig. 5 and 6)

Most cameras automatically activate the fill-in flash mode in daylight (see camera’s

operating instructions) when in Program “P” or a Subject Program Mode.

Fill-in flash overcomes troublesome dense shadows and produces a more

balanced exposure between subject and background with contre-jour shots.

The camera’s computer-controlled metering system sets the most suitable

combination of shutter speed, working aperture and flash output.

Ensure that the contre-jour light source does not shine directly into the

lens as this will mislead the camera’s TTL metering system!

In this instance there is no setting or display on the flash unit for TTL fill-in flash.

☞

54 AF-1 M 03.08.2004 10:53 Uhr Seite 56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metz MECABLITZ 54 AF-1 Minolta Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info