123
Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears. Thereafter, the flash
unit always switches on with the mode of operati-
on that was used last .
• Press the button and the drop-down
menu will appear.
• Use the buttons to select the operating
mode.
• Press the
° button and confirm the selected
operating mode.
• Tap the shutter release to transfer data between
the flash unit and the camera.
Various cameras support manual flash mode M
only in the camera's M mode (manual).
In other camera models, an error message appears
in the display and the release is locked.
M
Manual partial light output levels
Partial light output can be set in manual flash
mode.
Setting procedure
• Use the buttons to set the desired partial
light output (P). The distance information is adju-
sted according to how the partial light output is
set.
The setting is immediately effective and automati-
cally saved.
The distance display is adjusted to the partial light
output automatically (see 5.2).
P 1/1
7.9m
MODE
TTL
M
LED
M
P 1/16
1.9m
M
+
k
