Bedienungsanleitung Microlife BP A7 Touch BT (Seite 7 von 101) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

773522

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

5BP A7 Touch BT EN

5. Data Memory

This device automatically stores up to 99 measurement values for

each of the 2 users and guest mode.

Viewing the stored values

Switch the lock switch 3 to «unlock» position. Select either user

1 or 2 with the user indicator BM. Press the M-button AO briefly. The

display shows an average value.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored

value to another.

Memory full



Pay attention that the maximum memory capacity of 99

memories per user is not exceeded.

When the 99 memory is

full, the oldest value is automatically overwritten with the

100th value.

Values should be evaluated by a doctor before

the memory capacity is reached – otherwise data will be lost.

Clearing all values

Make sure the correct user is activated.

1. Firstly unlock the device 3, then select either 1 or 2 with the

user indicator BM.

2. Hold down the M-button

until «

» appears and then release

the button.

3. Press the M-button while «CL» is flashing to permanently clear

all values of the selected user.



Cancel deletion:

press START/STOP button

while «

is flashing.

Individual values cannot be cleared.

6. Battery Indicator and Battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol

will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably, you

should obtain replacement batteries.

Flat battery – replacement

When the batteries are flat, the battery symbol AS will flash as soon

as the device is switched on (flat battery displayed). You cannot

take any further measurements and must replace the batteries.

1. Open the battery compartment AT at the back of the device.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in

«Section 2.».

The memory retains all values although date and time must

be reset – the year number therefore flashes automatically

after the batteries are replaced.

Which batteries and which procedure?

Use 4 new, long-life 1.5 V, size AAA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not

intend to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

7. Using a Mains Adapter

You can operate this device using the Microlife mains adapter

(DC 6V, 600 mA).



Only use the

Microlife

mains adapter available as an original

accessory appropriate for your supply voltage.

Ensure that neither the mains adapter nor the cable are

damaged.

1. Plug the adapter cable into the mains adapter socket 9 in the

blood pressure monitor.

2. Plug the adapter plug into the wall socket.

When the mains adapter is connected, no battery current is consumed.

8. Bluetooth® Function

This device can be used in conjunction with a smartphone running

the «Microlife Connected Health+» App. The Bluetooth® connec-

tion is automatically active after the measurement has been

completed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife BP A7 Touch BT Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info