Bedienungsanleitung Microlife BP B3 COMFORT PC (Seite 6 von 83) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

773518

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

Viewing the stored values

Press the M-button 3 briefly, when the device is switched off. The

display first shows «M» BO and «A», which stands for the average

of all stored values.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored

value to another.

Blood pressure readings with suboptimal cuff fit AR-A are

not considered in the average value.



Pay attention that the maximum memory capacity of 99

memories is not exceeded.

When the 99 memory is full, the

oldest value is automatically overwritten with the 100th

value.

Values should be evaluated by a doctor before the

memory capacity is reached – otherwise data will be lost.

Clearing all values

Make sure the correct user is activated.

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the device must have been

switched off beforehand) until «CL ALL» appears and then

release the button. To permanently clear the memory, press the

MAM button while «CL ALL» is flashing. Individual values cannot

be cleared.



Cancel deletion:

press ON/OFF button

while «

CL ALL

is flashing.

5. Battery Indicator and Battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol

will flash as soon as the device is switched on (partly filled battery

displayed). Although the device will continue to measure reliably, you

should obtain replacement batteries.

Flat battery – replacement

When the batteries are flat, the battery symbol AQ will flash as soon

as the device is switched on (flat battery displayed). You cannot

take any further measurements and must replace the batteries.

1. Open the battery compartment 9 at the back of the device.

2. Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

3. To set date and time, follow the procedure described in

«Section 1.».

The memory retains all values although date and time must

be reset – the year number therefore flashes automatically

after the batteries are replaced.

Which batteries and which procedure?

Use 4 new, long-life 1.5 V, size AA alkaline batteries.

Do not use batteries beyond their date of expiry.

Remove batteries if the device is not going to be used for a

prolonged period.

Using rechargeable batteries

You can also operate this device using rechargeable batteries.

Only use «NiMH» type reusable batteries.

Batteries must be removed and recharged when the flat

battery symbol appears. They should not remain inside the

device as they may become damaged (total discharge as a

result of low use of the device, even when switched off).

Always remove the rechargeable batteries if you do not

intend to use the device for a week or more.

Batteries cannot be charged in the blood pressure monitor.

Recharge batteries in an external charger and observe the

information regarding charging, care and durability.

6. Using a Mains Adapter

You can operate this device using the Microlife mains adapter

(DC 6V, 600 mA).



Only use the

Microlife

mains adapter available as an original

accessory appropriate for your supply voltage.

Ensure that neither the mains adapter nor the cable are

damaged.

1. Plug the adapter cable into the mains adapter socket 7 in the

blood pressure monitor.

2. Plug the adapter plug into the wall socket.

When the mains adapter is connected, no battery current is consumed.

7. PC-Link Functions

This device can be used in conjunction with a personal computer

(PC) running the Microlife Blood Pressure Analyzer+ (BPA+) soft-

ware. The memory data can be transferred to the PC by

connecting the monitor via a cable.

If no download-voucher and cable is included download the BPA+

software from www.microlife.com/software and use a Micro-USB

cable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife BP B3 COMFORT PC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info