Bedienungsanleitung Microlife BP B3 COMFORT PC (Seite 7 von 83) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

773518

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

5BP B3 Comfort PC EN

8. Error Messages

If an error occurs during the measurement, the measurement is

interrupted and an error message, e.g. «Err 3», is displayed.

* Please immediately consult your doctor, if this or any other

problem occurs repeatedly.

9. Safety, Care, Accuracy Test and Disposal

Safety and protection

Follow instructions for use. This document provides important

product operation and safety information regarding this device.

Please read this document thoroughly before using the device

and keep for future reference.

This device may only be used for the purposes described in

these instructions. The manufacturer cannot be held liable for

damage caused by incorrect application.



This device comprises sensitive components and must be treated

with caution. Observe the storage and operating conditions

described in the «Technical Specifications» section.

Protect it from:

- water and moisture

- extreme temperatures

- impact and dropping

- contamination and dust

- direct sunlight

- heat and cold

The cuffs are sensitive and must be handled with care.

Do not exchange or use any other kind of cuff or cuff connector

for measuring with this device.

Only pump up the cuff once fitted.



Do not use this device close to strong electromagnetic fields such

as mobile telephones or radio installations. Keep a minimum

distance of 3.3 m from such devices when using this device.

Do not use this device if you think it is damaged or notice

anything unusual.

Never open this device.

If the device is not going to be used for a prolonged period the

batteries should be removed.

Read the additional safety information provided within the indi-

vidual sections of this instruction manual.

If you suffer from a cardiac arrhythmia consult with your doctor

before using the device. See also chapter «Appearance of the

Irregular Heartbeat (IHB) Symbol» of this user manual.

The measurement results given by this device is not a diag-

nosis. It is not replacing the need for the consultation of a physi-

cian, especially if not matching the patient’s symptoms. Do not

rely on the measurement result only, always consider other

potentially occurring symptoms and the patient’s feedback.

Calling a doctor or an ambulance is advised if needed.

Permanently high blood pressure values can damage your

health and must be treated by your doctor!

Always discuss your values with your doctor and tell him/her if

you have noticed anything unusual or feel unsure. Never rely

on single blood pressure readings.



Under no circumstances should you alter the dosages of

drugs or initiate a treatment without consulting your doctor.

Deviations between measurements taken by your doctor or in

the pharmacy and those taken at home are quite normal, as

these situations are completely different.

The pulse display is not suitable for checking the

frequency of heart pacemakers!

If you are pregnant, you should monitor your blood pressure

regularly as it can change drastically during this time.

Error Description Potential cause and remedy

Err 1

Signal too

weak

The pulse signals on the cuff are too

weak. Re-position the cuff and repeat the

measurement.*

Err 2

AR-B

Error signal During the measurement, error signals

were detected by the cuff, caused for

instance by movement or muscle tension.

Repeat the measurement, keeping your

arm still.

Err 3

AR-C Abnormal

cuff

pressure

An adequate pressure cannot be gener-

ated in the cuff. A leak may have occurred.

Check that the cuff is correctly connected

and is not too loose. Replace the batteries

if necessary. Repeat the measurement.

Err 5

»Abnormal

result The measuring signals are inaccurate and

no result can therefore be displayed. Read

through the checklist for performing reli-

able measurements and then repeat the

measurement.*

Err 6

MAM

Mode There were too many errors during the

measurement in

MAM

mode, making it

impossible to obtain a final result. Read

through the checklist for performing reli-

able measurements and then repeat the

measurement.*

» Pulse or cuff

pressure too

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high (over

200 beats per minute). Relax for 5 minutes

and repeat the measurement.*

» Pulse too

low The pulse is too low (less than 40 beats

per minute). Repeat the measurement.*

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife BP B3 COMFORT PC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info