5
NOTE:
• In order to avoid cross-contamination, please reload a new probe cover for each measurement.
• Please check if the probe cover is fitted on firmly before use (please see the diagrams below); If the
probe cover is broken, discard the probe cover and reload a new one immediately.
(X) Incorrect (O) Correct
7. Directions for Use
Important: Prior to every measurement, fit a new undamaged Probe Cover on the measuring probe. Fail-
ure to do so may result in incorrect temperature measurement.
1. Press the O/I button. The LCD is activated to show all segments for
2 seconds.
2. The last measurement reading will be shown on the display auto-
matically for two seconds with the «M» icon.
3. When the °C or °F icon is flashing, a beep sound is heard and the
thermometer is ready for the measurement.
6. How to Reload a New Probe Cover
(1) Place a probe cover onto the storage case
hole with paper side upwards.
(3) Completely push the probe into the probe
cover holder hole.
(2) Take the unit, vertically penetrate the probe
into the center part of the probe cover.
(4) After feeling a slight «click», take out the
probe with cover attached tightly.
