Bedienungsanleitung Microlife NC400 (Seite 7 von 93) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

773526

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

7NC 400 EN

10.Error Messages



Measured temperature too high

Displays «

» when

measured temperature is higher than

43.0 °C / 109.4 °F

body mode or 99.9 °C / 211.8 °F in object mode.

Measured temperature too low AS:Displays «L»

when measured temperature is lower than 34.0 °C /

93.2 °F in body mode or 0.1 °C / 32.2 °F in object mode.

Ambient temperature too high BT: Displays «AH»

when ambient temperature is higher than 40.0 °C /

104.0 °F.

Ambient temperature too low BK: Displays «AL»

when ambient temperature is lower than 5.0 °C / 41.0 °F

in object mode.

Error function display BL:

-«Er 0» / «Er 6»: The system has a malfunction.

Blank display BM: Check if the batteries have been

inserted correctly. Also check polarity (<+> and <->) of

the batteries.

Flat battery indicator BN: If only «battery» icon is

shown on the display, the batteries should be replaced

immediately.

11.Cleaning and Disinfecting

Use an alcohol swab or cotton tissue moistened with alcohol

(70% Isopropyl) to clean the thermometer casing and the

measuring sensor. Ensure that no liquid enters the interior of

the device. Never use abrasive cleaning agents, thinners or

benzene for cleaning and never immerse the device in water

or other cleaning liquids. Take care not to scratch the

surface of the sensor lens and the display.

12.Battery Replacement

This device is supplied with 2 new, long-life 1.5V, size AAA

batteries. Batteries need replacing when this icon

«battery» BN is the only symbol shown on the display.

Open the battery cap BQ with a tool and lift it manually.

Replace the batteries – ensure correct polarity as shown by

the symbols in the compartment.

Batteries and electronic devices must be dispo-

sed of in accordance with the locally applicable

regulations, not with domestic waste.

13.Guarantee

This device is covered by a 5 year guarantee from the date

of purchase. During this guarantee period, at our discre-

tion, Microlife will repair or replace the defective product

free of charge.

Opening or altering the device invalidates the guarantee.

The following items are excluded from the guarantee:

Transport costs and risks of transport.

Damage caused by incorrect application or non-compli-

ance with the instructions for use.

Damage caused by leaking batteries.

Damage caused by accident or misuse.

Packaging/storage material and instructions for use.

Regular checks and maintenance (calibration).

Accessories and wearing parts: Batteries, Probe cover

(optional).

Should guarantee service be required, please contact the

dealer from where the product was purchased, or your local

Microlife service. You may contact your local Microlife

service through our website:

www.microlife.com/support

Compensation is limited to the value of the product. The

guarantee will be granted if the complete product is

returned with the original invoice. Repair or replacement

within guarantee does not prolong or renew the guarantee

period. The legal claims and rights of consumers are not

limited by this guarantee.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife NC400 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info