Bedienungsanleitung Midas M32 (Seite 14 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

14 M32 DIGITAL CONSOLE User Manual

(5) VIEW

Press the VIEW button to access more detailed parameters on the

MainDisplay.

Operation

The MONITOR section shares a Main Display screen with the TALKBACK

section. On this screen, only the monitor tab contains functionality which

relates to the MONITOR section. This tab controls various console options

relating to the solo bus, as well as the console’s control room outputs. These

options include various solo settings, speaker dimming, speaker delay, and a

selection of sources for the control room output.

To adjust the settings on the monitor tab, perform the following steps:

1. Adjust the rst push encoder to change the gain of the monitor signal.

This digital stage occurs as a rst preliminary level control, before the

top panel’s analogue-based monitor level control. A display above the

push encoder shows the currently set gain value in dB.

• A multi-segment level meter is displayed on the Main Display to

allow for proper gain staging of the monitor signal.

2. Adjust the second push encoder to scroll through the various solo

methods available to the console when audio is routed to the solo bus.

Available options include:

• Exclusive (last): In this mode, pressing another SOLO button

disengages the previous solo

• Solo Follows Select: When this method is selected, the audio of

the currently selected channel will automatically be sent to the solo

bus. Since a user will often select a channel to adjust its dedicated

DSP controls, this method is useful because the audio of the

channel will now already be feeding he solo bus where it can be

monitored with headphones in a live sound environment

• Select Follows Solo: When this method is selected, any

channel that is soloed will automatically become the currently

selectedchannel

• Ch Solo AFL: The channel and select button do not have any

correlation to each other. When a channel’s SOLO button is

pressed, its audio is sent to the solo bus in ‘after-fader-listen’ mode,

reecting the current level of the channel fader and any channel

DSP that has been applied. The default setting for input channels is

o for ‘pre-fader-listen’.

• MixBus Solo AFL: Selecting this method will set the mix bus solo

to post-fader

• DCA Solo AFL: Selecting this method will set the DCA solo to

post-fader

• Use DIM for PFL: Selecting this option will apply DIM to all

PFLsignals

• Use Master Fader: This allows the main fader/MUTE button to

control the solo/mon output.

3. Tap the second encoder to select and assign the currently chosen

solooption.

4. Turn the third encoder to adjust the amount of digital delay that is

applied to the control room signal path. The display on the screen will

show the current amount of delay in feet, metres and milliseconds.

5. Tap the third encoder to toggle the delay function on or o.

TIP: The delay function is useful for aligning the sound of audio monitored

through headphones, or speakers used at front-of-house position with

audio that is coming from the stage location.

By delaying the control room audio, it can be brought into alignment with

the slightly-delayed audio that has to travel from the stage to the front-of-

house position.

6. Adjust the fourth encoder to set the amount of volume reduction

that occurs when the control room bus has its DIM function enabled.

Theamount of volume reduction ranges from -40 dB to 0 dB

(nochange).

7. Tap the fourth encoder to toggle the DIM function on or o.

8. Turn the fth encoder to adjust the volume trim for the source currently

feeding the control room bus, allowing it to be level matched with the

SOLO bus. The amount of trim can be adjusted from -20 dB to +20 dB.

9. Tap the fth encoder to toggle the control room between mono and

stereo operation. This is very useful in a studio context for checking how

a mix sounds when played back on a mono speaker such as a cock radio.

10. Adjust the sixth encoder to select what specic signal source to monitor

in the control room. Choices include:

• O (no source) in the control room, when no SOLO is active

• LR Bus

• LR + C/M

• LR PFL (Pre-Fade Listen)

• LR AFL (After-Fade Listen)

• Auxiliary returns 5/6

• Auxiliary returns 7/8 (USB Recorder).

11. Tap the sixth encoder to activate the signal source that has been chosen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info