Bedienungsanleitung Midas M32 (Seite 23 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

23 M32 DIGITAL CONSOLE User Manual

The eq tab displays all aspects of the channel EQ, and also displays a detailed

visual graphic of the current EQ curve. This tab can also be accessed directly by

pressing the VIEW button on the top panel EQUALISER section.

1. If the currently selected channels is an input, the channel EQ contains four

bands, with various aspects of each band adjusted by push encoders 2-5.

2. If the currently selected channel is a bus, the channel EQ contains six bands,

with various aspects of each band adjusted by encoders 1-6.

3. On the EQ screen, the various push encoders are always tied to the various EQ

bands, and the Up/Down navigation controls are used to toggle whether the

four/six push encoders adjust:

• Gain

• Frequency

• Width

• EQ mode.

Page 1 (Gain)

1. Adjust the rst push encoder to set the frequency of the channel

low-cutlter.

2. Tap the rst encoder to toggle the low-cut lter in/out of the signal path.

3. Adjust the second encoder to boost/cut the gain of the low band.

4. Adjust the third encoder to boost/cut the gain of the low-mid band.

5. Adjust the fourth encoder to boost/cut the gain of the high-mid band.

6. Adjust the fth encoder to boost/cut the gain of the high band.

7. Tap the sixth encoder to toggle the EQ in/out of the signal path.

Page 2 (Frequency)

1. Works as above, but the push encoders now adjust the frequency centre

points for the dierent EQ bands.

Page 3 (Width)

1. Works as above, but the push encoders now adjust the bandwidth for the

dierent EQ bands. Use a narrow slope for working with a specic frequency,

or use a broader slope for general tone-shaping.

Page 4 (Mode)

1. Works as above, but the push encoders now adjust the EQ mode for each EQ

band. Choices include:

• Low cut

• Low shelf

• Parametric EQ

• Vintage EQ

• High shelf

• High cut.

sends

The sends tab displays and controls all aspects of the channel sends to the 16mix

buses. Compared to the dedicated top panel send controls, this screen oers

additional functions, such as send muting and simultaneous metering of the

selected channel’s 16 sends. This tab can also be accessed directly by pressing the

VIEW button in the top panel SENDS section.

The sends tab contains the following parameters that can be adjusted using

the six push encoders:

Page 1

1. Adjust the rst push encoder to set the level for the rst send of the

currently selected four-send group.

2. Tap the rst encoder to mute the rst send of the currently selected

four-send group.

3. Repeat the process with the next three encoders for the remaining

three sends in the currently selected four-send group.

4. Adjust the sixth encoder to select which four sends to control with the

rotary controls, shifting focus two sends at a time.

5. Tap the sixth encoder to select which four sends to control with the

rotary controls, shifting focus four at a time.

Page 2

1. Adjust the rst push encoder to select from where in the signal chain

the send is tapped, for the rst two sends of the currently focused four

sends. Options include:

• Pre-EQ

• Post-EQ

• Pre-fader

• Post-fader

• Sub-group.

2. Adjust the third encoder to perform the same operation for the second

two sends of the currently focused four sends.

3. Adjust the sixth encoder to select which four sends to control with the

rotary controls, shifting focus two sends at a time.

4. Tap the sixth encoder to select which four sends to control with the

rotary controls, shifting focus four at a time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info