Bedienungsanleitung Midas XL48 (Seite 15 von 32) (Englisch)

658472

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operator Manual

XL48 Microphone Pre-amplier

Introduction

Welcome!

Thank you for purchasing an XL48 Microphone Pre-amplier (Mic Pre-amp).

The XL48 is a premium quality, 8-channel Midas microphone pre-amplier with

high quality driven analogue outputs and multiple digital outputs (two ADAT and

two AES3) occupying 1U of rack space. It uses an enhanced version of the Midas

XL4 mic pre-amp for the analogue front end, coupled with the XL4’s low and high

pass lter circuitry. This, together with the A/D converter technology from the

Midas XL8, provide a classleading microphone pre-amplier solution.

The XL48 was conceived by Midas to oer audio professionals high performance

audio equipment, designed to provide no-compromise sonic quality with a

feature set that oers all essential facilities and functions. It represents the

very best of British design and engineering combined with contemporary,

ecientmanufacturing methods, and will give you many years of

reliableservice.

So, to obtain the best results with a minimum of eort, please read this operator

manual and, nally, enjoy your Midas XL48 Microphone Pre-amplier!

1.1 Key features

The XL48 has the following key features:

• Mic pre-amps Eight premium Midas mic preamps (based on the classic

Midas XL4 design, but with improvements).

• Analogue and digital The XL48 combines both analogue and

digitaltechnologies.

• Filters Low and high pass lters (based on the classic Midas XL4 design).

• Meters Eight-segment LED meters.

• A/D converters High quality A/D converters (as used on the Midas XL8

LivePerformance System).

• Inputs Eight balanced XLR inputs plus eight ‘parallel’ balanced inputs on a

25way, Dtype connector.

• Analogue outputs Eight balanced high quality driven analogue outputs on

a 25way, Dtype connector.

• AES3 outputs Two sets of eight AES3 outputs on a 25way, Dtype connector.

• ADAT Two sets of eight-channel ADAT output connections.

• Conguration Switch for setting both the clock frequency (44.1 kHz,

48kHz, 88.2 kHz or 96 kHz) and the synchronisation (sync), which can be

either internal or external.

• Word clock Word clock input/output BNC connectors.

• Operator interface Indication of sample frequency and external sync on

the front panel.

• Channel functions Each channel has the following:

• 48 V phantom voltage switch

• PAD switch (20 dB range)

• Ø switch (180° range)

• Mic gain, variable from +10 dB to +60 dB

• low pass lter, 12 dB/Octave slope continuously variable -3 dB point

from 1 kHz to 40 kHz

• high pass lter, 12 dB/Octave slope continuously variable -3 dB point

from 10 Hz to 400 Hz

• 8-segment LED meter

• Power supply Mains power supply with IEC mains connector.

1.2 About this manual

This is the operation manual for the XL48 Microphone Pre-amplier. It is intended

to help get your unit installed and in operation as quickly as possible by giving

you unpacking, installation, connection, setting up and operating instructions.

To help familiarise you with the XL48 there is a description of the front and rear

panels, along with easy-to-follow user instructions.

midasconsoles.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas XL48 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info