Bedienungsanleitung Midea RSJ-35 - 300RDN3 (Seite 15 von 22) (Englisch)

684504

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Installation & Owner's Manual

1 2

No Icon Description

1 5

1 6

Timer

There are six timers available.

If anyone of them has been set,

will lighten the corresponding one when

screen is unlocked；

If there is none of timers has been set, it the

icon will keep extinguished.

If timer is being set,

will flash the

corresponding one with 2Hz frequency and

lighten the timer which has been set.

Clock and clock setting

shows the clock.

Whenever there is any setting for clock,

will be lightened.

No. Icon Description

Manually turn E-heater ON

If E-heater is OFF, follow these steps below to

manually turn it on.

If E-heater is already ON, Press will lead

to show invalid icon on the display.

Long pressing the E-heater key for 10s then can

shift to set the temperature display unit from "F" to

"C" or from "C" to "F". The default is "C" (when it's

shifted to display "F", it still will display "C" while it

operates spot check).

INCREASE

If screen is unlocked, corresponding value will

increase by pushing .

● When setting temperature, press more

than 1s, Temperature value will be increased

continuously;

● When Setting clock/timer, press more

than 1s, Clock/timer value will be increased

continuously;

● When setting vacation days, press more

than 1s, day value will be increased continu-

ously;

On querying, check items will page up by

pressing .

Only in unlocked state, pressing the button is functional.

Icon will flash.

Confirm manually turning E-heater on,

then E-heater is activated to heat up water

to the target temperature. If it needs

manually turn E-heater on again, it has to

repeat these steps.

Invalid

No Icon Description

Set Clock

3.1

3.2

Set the hour value of clock.

Confirm the hour setting. Then the minute

value of clock will flash slowly.

Set the minute value of clock.

Confirm the minute setting and quit clock

setting.

Press button for 3 sec to enter clock

setting. Then icon will be

lightened and the hour value of clock will

flash slowly.

Set Timer

Set the hour value of timer.

Set the minute value of timer.

Set the action(ON or OFF) of the timer.

Set the water temperature of the setting timer.

Confirm the action(ON or OFF) of the timer.

Enter timer setting.

Select timer( ~ ) to be set. The timer

icon will flash slowly if it is selected

Confirm the selected setting timer.

Then will be lightened. Then

the hour value of timer will flash slowly.

Confirm the hour value of timer. Then the

minute value of timer will flash slowly.

Confirm and complete the timer. Then

repeat this process to set another timer.

Confirm the minute value of timer. Then

ON or OFF icon following the setting

timer will flash slowly.

ON/OFF

OFF

The display screen will automatically

display different value at by

different action. It will display the last set

temperature and icon if the action is

ON, or will display if the action is

OFF.

Table.5-2

Fig.5-3

① ③

④⑨

⑦ ⑥ ⑤

②

⑧

SET

SET CLOCK

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midea RSJ-35 - 300RDN3 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midea RSJ-35 - 300RDN3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info