Customization
8 CUSTOMIZATION
This section describes the settings that regulate various parameters,
depending on environment and specic use of the radio; for example,
display contrast, backlighting, etc.
8.1 Adjustment of microphone sensitivity
Normally, the sensitivity of the microphone allows the user to speak at
a distance of up to 10 centimetres from the microphone. However, if
the surroundings or the vehicle in which you are working is particularly
noisy, you can reduce the sensitivity of the microphone so as to avoid
transmitting your surrounding noises to others. When the sensitivity
is decreased, you need to speak closer to the microphone and/or with
a louder voice, but your message will still be heard clearly. To adjust
the microphone sensitivity:
1) Press the
button to access the command menu, then use the
buttons to highlight the Radio Param option.
2) Press
to view the sub-menus available.
3) Press the
buttons until the Mic. Sens. (microphone
sensitivity) sub-menu is highlighted. The display will show Lo (low
sensitivity) or Hi (high).
4) Press
if you wish to change the setting from Lo to Hi or vice-
versa.
5) Exit the sub-menu by pressing the F4/ESC button, then press it
a second time to exit the main menu and return to the standby
screen.
8.2 Adjustment of display contrast
Depending on your ambiental light and temperature, you may wish
to change the display contrast in order to better view the screen. To
change the contrast:
1) Press the
button to access the command menu, then use the
buttons to highlight the Lcd&Keypad option.
2) Press
to view the sub-menus available.
3) Press the
buttons until the Contrast (adjustment of di-
splay contrast) sub-menu is highlighted, then press
to enter
the setting. CONTRAST will appear on the display, and will show
a series of horizontal bars proportional to the contrast currently
selected.
4) Press the
or buttons repeatedly until the desired contrast
level appears.
5) Press
to conrm the contrast level setting.
6) Exit the sub-menu by pressing the F4/ESC button, then press it
a second time to exit the main menu and return to the standby
screen.
8.3 Backlight adjustment
This command is for setting display and keypad backlight adjustment
and auto-adjustment as follows:
1) Press the
button to access the command menu, then use the
buttons to highlight the Lcd&Keypad option.
2) Press
to view the sub-menus available.
3) Press the
buttons until the Light (backlighting) sub-me-
nu is highlighted. The display will show:
• On–backlightalwaysactivated
