Bedienungsanleitung Midland BT City 2013 (Seite 2 von 9) (Englisch)

543239

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Midland BTCity (from vers. rmware 14.03.13)

Thank you for purchasing the Midland BTCity, the wireless intercom

multimedia system for bikers. The Midland BTCity is designed to be t-

ted directly on to your helmet and to be used for communications with

Bluetooth devices like mobile phones, GPS Sat-Navs and MP3 players. If

desired, it can also be paired with another Midland BTCity unit and used

as wireless Rider/Pillion Intercom system or Rider to Rider in bike-to-

bike mode, within a maximum range of 200 meters. The Midland BTCity

is also supplied with a wired connection that can be used to connect an

iPod/MP3 player or PMR446 transceiver,which will then enable bike-to-

bike communications up to a maximum range of 5 km.

Midland BTCity is available in two versions:

› Single BTCity Intercom kit with one unit only

› BTCity Intercom TWIN with two units

Depending on the model purchased, the package contains the fol-

lowing parts:

BTCity

› 1 BTCity communication unit

› 1 audio kit with two stereo speakers, microphone with boom and

wire microphone

› 1 plate with bi-adhesive strip to x the unit onto the helmet

› 1 clamp to x the unit onto the helmet

› 1 stereo audio cable to connect an iPod/ or other models of MP3

players

› 1 miniUSB wall-mounting power supply

› Wind Suppressing Foam Microphone Cover, Allen key and Velcro

strip for assembly

BTCity TWIN

› 2 BTCity communication units

› 2 audio kits with two stereo speakers, microphone with boom and

wire microphone

› 2 plates with bi-adhesive strip to x the unit onto the helmet

› 2 clamps to x the unit onto the helmet

› 2 stereo audio cables to connect an iPod/ or other models of MP3

players

› 1 miniUSB wall-mounting power supply with double plug

› Wind Suppressing Foam Microphone Cover, Allen key and Velcro

strip for assembly

The units included in the TWIN kit are already paired and can therefo-

re be immediately used in the Intercom mode.

Technical specications of Midland BTCity

General:

› Bluetooth ver. 2.1 stereo (Headset/Handsfree/A2DP protocol)

› AGC system automatically controls the volume in relation to

background noise

› Voice (VOX) or manual communications option

› Manual controls to enable: telephone, intercom and wire con-

nection

› Fully waterproof

› Lithium battery with 8 hours talk time

› Recharge time: app. 4 hours

Bluetooth connections:

› Identical device for Rider to Pillion or Bike-to-Bike Intercom mode,

up to a maximum range of 200 meters

› With BT Remote for easy to use handlebar commands

› Bluetooth devices

- Mobile phone with MP3 player Stereo (A2DP protocol), GPS (spe-

cic for motorbike)

- PMR446 transceivers (with built-in or external Bluetooth con-

nection) for group bike-to-bike communications

Wire connections:

› For stereo audio input (iPod/MP3 player)

› For PMR446 transceivers (with optional cable)

Attention: before using BTCity for the rst time, remember to

recharge it for at least 5/6 hours.

Attention: Midland BTCity is designed to withstand rain and wa-

ter. However, if it is raining, always verify that the rubber caps

protecting the sockets are fully tted.

Charging batteries

Make sure that the unit is fully charged before use. Allow at least 5/6

hours for a full charge before using the unit for the rst time. Normal-

ly, after the rst time, it takes 4 hours for a full charge.

Charge the unit by inserting the wall-charger into the charging socket

(lift the rubber cover to insert the plug).

› The red LED on the unit will start ashing when charging begins.

› Allow the headset to charge until the blu LED turns on.

› When the charge is complete (blu LED on), release the headset

from the charger.

Attention: everytime the mini USB recharging plug is inserted,

the device is automatically turned o. To use it while it is in

charge, you should turn the device on with the plug already

inserted.

Description of the unit and installation

brackets

The BTCity has 3 multifunction buttons and 3 wired connections in

the lower section.

Description of the button features:

› Control: can be used to enable/disable the intercom and manage

mobile phone features

› Volume+: enables you to increase the volume

› Volume -: enables you to decrease the volume

Description of the wired connections

› Charger jack: enables to recharge the unit using a standard mini

USB power supply and rmware upgrade via PC connection

› Audio kit jack: enable to connect an audio kit (stereo headset and

microphone)

› Auxiliary audio jack (AUX): can be used to connect an audio source,

like a stereo iPod/MP3 player or PMR446 transceiver

Description of the audio kit

The audio system includes two ultra-at stereo speakers and two in-

terchangeable microphones, which are both supplied with a bracket

and wire connection.

Fixing the stereo speakers

The two stereo speakers have a Velcro/adhesive strip that aids their

xing to your helmet.

The microphone can be xed onto the helmet in two ways:

Boom Microphone

Place the section with the Velcro/adhesive strip between the padding

and the rigid cover of the helmet, so that the microphone is correctly

positioned in front of your mouth and that the white symbol is facing

your mouth. This type of microphone is suited for Open Faced and Flip

Front helmets.

Volume+Volume -

Control

Charger jack

Auxiliary audio jack

(AUX)

Audio kit jack

Midland BT City 2013 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland BT City 2013

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info