Bedienungsanleitung Midland BT NEXT CONFERENCE (Seite 25 von 118) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

579651

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

24 - Midland BT Next

Conference

The “Conference” mode allows the communication with four people simulta-

neously. The BT Next C. Conference unit can work as usually, with “one to one”

communication up to 6 people (“classic” Intercom mode) or with 4 people confe-

rence intercom (Conference mode).

How to use the conference mode

First of all you need to pair all the units in a “chain” mode, second the “Conference”

feature must be active on all the units paired.

Pairing

To use the conference mode you need to pair all the units in a “chain” congura-

tion. The BWD button of the rst unit must be paired to the FWD button of the

second unit. The BWD button of the second unit must be paired to the FWD button

of the third unit and so on, till the fourth!

The rst and the last unit must not be paired together (the chain must stay open).

The unit number 1 can talk to the last unit (number 4) only “through” the unit

number 2 and number 3. That means to have the conference with four people, all

the unit must have the intercom open.

Activate Conference mode:

In “Intercom Mode” and no active audio, keep pressed the FWD button for 7 sec.

The voice announcement “Conference” will tell you that it is active.

Disable Conference mode:

In “Intercom Mode” and no active audio, keep pressed the FWD button for 7 sec.

When in Intercom mode the voice announcement “Intercom” will tell you that you

are back to the standard Intercom functionality.

When the Conference mode is active, only two mode are available:

Conference (that replace the Intercom mode) and FM radio.

There is no more the “Phone” mode because all the devices paired on Vol+ and Vol

– are temporary disconnected to guarantee the stability of the conference mode.

Attention: when the “conference” mode is active, the “Talk2All- Universal Intercom”

(to talk with not Midland brand intercom) is not available.

Also if one unit was paired on the CTRL (middle) button, it is temporary unavaila-

ble, you need to disable the “Conference” mode and go back to the standard “one

to one” Intercom mode.

How to use the conference mode

When the conference mode is active, is possible to open the intercom communi-

cation pressing both the FWD and BWD button. One click on the button will open

the intercom communication, one click on the same button will close it.

The two units that are in the middle of the chain (unit 2 and 3) must keep the

intercom open on both FWD and BWD button to allow the full communication of

the four units together.

Disable the “conference” mode

The conference mode can be disable in every moment, just pressing the FWD

button for 7 sec. You will hear the voice announcement “Intercom” and from that

moment your BT Next C. Conference will start working with “one to one” intercom

and all the devices paired on Vol+ and Vol- are back, together with the “Phone”

mode and the “Talk2All-Universal intercom” feature.

“One Click Talk” function

When the conference mode is active, is possible to open the intercom communi-

cation to all the 4 users just in “one click”. Press short the CTRL (middle) button and

you will automatically open the conference intercom to all the unit connected.

Talk 2 All - Pairing to a diﬀerent brand intercom.

Thanks to the “Talk2 All - Universal Intercom” feature it is now possible to pair your

BT Next C. to a dierent brand intercom available on the market.

You can pair a maximum of two not Midland Intercom, one on the “Forward” but-

ton and one on the “Backward” button.

• On the BT Next C. enter the setup mode: (with the unit OFF press and

hold down the Middle button about 7 sec. until the Red light is on

permanently).

• Keep pressed the “Forward” button or the “Backward” button for 7

seconds: the Red and Blu LED light will start ashing fast, than (while

you still keep the button pressed) the Red and Blu LED light will change

to slow ashing. Now you can stop pressing the button.

Talk2All - Universal Intercom

Not Midland Unit

Talk2All - Universal Intercom

Midland Unit paired as a phone

Passenger

1 2 3 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland BT NEXT CONFERENCE Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info