Bedienungsanleitung Midland BTX1 PRO 2020 (Seite 11 von 42) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

738680

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

6 www.midlandeurope.com www.midlandeurope.com 7

If needed, you can disable the VOX feature simply by pressing the Backward button for

7 sec. A voice announcement will advise you when the VOX is disabled. To turn the VOX

on again, just press the same button and a voice announcement will advise you that the

VOX is now active. This setting is remembered also if you turn o the unit.

Adjusting the volume

Your Midland BTX1 PRO uses AGC technology, which automatically adjusts the listening

volume in relation to background noises. However, it is also possible to manually adjust

the volume by means of the “Volume +” and “Volume -“buttons.

The volume setting is indipendent for each audio source: intercom, stereo music, phone

call, FM radio.

Attention: volume can be adjusted only when an audio connection is active.

Set up of the AGC system

To adjust the sensitivity of the AGC system you can use the ”BT UPDATER” Pc Softwa-

re or the smartphone “BT SET-APP” application. You can choose dierent set up based

on your motorbike type (naked, touring, sport) or if you are riding as a passenger. You can

disable the AGC system pressing “Volume +” and “Volume -” togheter for 3 sec.

Compatibility with Midland BT line units

The BTX1 PRO is compatible with BTX2 PRO, BT Next PRO, BT Next Conference,

BTX2 FM and BTX1 FM.

When paired the max distance of the intercom is deﬁned from the lower possible.

The BTX1 PRO is compatible with the previous line of Midland BT (BT Next, BTX2 and

BTX1) only if updated to ﬁrmware version 2014 or later.

Talk 2 All - Universal Intercom with dierent brand unit

Thanks to the “Talk2 All - Universal Intercom” feature it is now possible to pair your BTX1

PRO to a dierent brand intercom available on the market.

1. On the BTX1 PRO enter the setup mode: (With the unit OFF press and hold down

the Middle button about 7 sec., until the Red light is on permanently.

2. Press the “Forward” button for 3 seconds, the Red and Blu LED light will ﬂash slowly.

3. On the other intercom (not Midland brand) follow the procedure to pair to a phone.

Talk2All - Universal Intercom

Not Midland Unit

Attention: remember to switch OFF all the other Bluetooth device during the pairing proce-

dure, only the two devices involved in the pairing must be turned on.

If successfully paired the red/blue light will stop ﬂashing and the blu light will slowly ﬂash

instead.

To open/close the “Universal Intercom” communication from the BTX1 PRO press

“Forward” button (in “Intercom” mode)

On the other intercom just press the phone redial button.

Maybe it will be necessary to press the dial button two times, depending on the model of

the not Midland intercom.

Attention: when using this conﬁguration, the other intercom (not Midland brand) will be able

to be paired to a phone only if two phones are supported.

Pairing the BTX1 PRO to Bluetooth devices

The BTX1 PRO Conference unit can be paired to other Bluetooth devices, like Pho-

ne, GPS Navigator or PMR446 Radio with built-in or external Bluetooth (dongle).

The pairing procedure must be done using the “Volume +” or the “Volume -“ buttons.

› Pairing to the “Volume +” button: for Phone with music A2DP stereo, GPS Navigator

with A2DP audio or external mono/Stereo A2DP dongle.

› All devices paired to “Volume +” button have higher priority and will interrupt all the

other communications (like Intercom, FM Radio and Music).

› Pairing to the “Volume -” button: for a second phone with mono audio (Hands Free

Protocol) for GPS navigators/ Radar detector and other devices with mono audio.

When a device is paired to the “Vol +” or “Vol –“ buttons the “Phone” mode is activated.

MONO

› Phone (HFP Mono)

› GPS mono

› PMR446 Transceiver

MONO and STEREO

› Phone (HFP/A2DP Stereo)

› GPS (HFP/A2DP Stereo)

› Dongle (HFP/A2DP Stereo)

Attention: A2DP audio source are supported only on Vol+. The second phone paired on Vol-

can support only mono audio (HFP).

Background feature

It is possible to keep always in background the audio of the device paired on Vol- button.

In this way the Intercom communication will not be interrupted, for example, by the

GPS’s street indication or other audio mono device.

To activate the “Background” feature just press long the “Vol-” button, the voice “Back

ground ON” will tell you that now is active.

To deactivate the “Background” feature just press again long the “Vol-” button, the voice

“Background disable” will tell you that now is not active anymore.

By default the “Background” feature is o.

Attention: we can’t guarantee this feature because it is depending on third part device.

Pairing with one or two phones

The cellular phone can be paired to the “Vol +” (if the support for stereo A2DP is reque-

sted) or to the “Vol –“.

When a phone is paired to the “Vol +” or “Vol-“ the “Phone” mode is activated.

An incoming call has always the higher priority, that means all other communications will

be closed (Intercom, FM Radio, Music).

If another incoming call will arrive on the second phone, an alert sound will notify it.

How to pair the BTX1 PRO to a Phone

To pair the BTX1 PRO to a Phone, you must ﬁrst enter the setup mode:

1. Turn o the unit

2. Press and hold down the middle button about 7 sec., until the Red light is on perma

nently.

3. Now press for 3 seconds the “Volume +” or “Volume -” button, the Blue and Red

light will ﬂash.

4. Enable the Bluetooth device search feature on your mobile phone

5. After some seconds, “Midland BTX1 PRO” will be displayed on your mobile phone.

Follow the pairing procedure of your Phone. If a pin code is requested you must enter

“0000” (four time zero).

When successfully paired, the Blue light of the unit will be on for one second and then

the unit will exit the setup mode and switch to the working mode (the Blue light will start

ﬂashing).

You can use now your BTX1 PRO together with the Phone.

How to use a Phone

After pairing your phone to the BTX1 PRO unit you must switch to the “Phone” mode in

order to use it. Press the middle button until you hear “Phone” from the voice announce

ment. Now all the three main buttons are dedicated to the phone (see Table B)

Answering a call

When you hear the phone ring, you can answer in two dierent ways:

Vocally:

Simply say one word to answer the call and start talking.

Manually:

Tap the “Forward” button and start talking.

Rejecting a call

If you don’t wish to answer, you can let the mobile phone ring or press the “Forward”

button for 3 seconds (you will hear one audio conﬁrmation tone).

Making a call

There are several ways to make a call.

Midland BTX1 PRO 2020 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info