Bedienungsanleitung Midland BTX2 PRO S (Seite 24 von 124) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

738621

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

22 www.midlandeurope.com

› You can switch (toggle) from one mode to the other simply pressing the

Middle button for 3 seconds. A voice announcement will tell in which mode

you are on.

The toggle sequence is the following:

› Intercom mode (if another unit has been paired)

› FM Radio

› Phone mode (if a phone has been paired)

Every time you turn on the unit, the default mode is the last used mode.

The Intercom mode and Phone mode are avalaible only if it was previously pai-

red to another unit or to a phone.

If you need to know in which mode the unit currently is, just press the “Volume

+ “ and “Volume –” button together. A voice announcement will tell you the

current mode.

Maximum Distance

You can reach 1.2 Km intercom distance if you are in line of sight without ob-

structions and interferences (the riders must be always in sight).

How to pair two Midland BTX2 PRO S units

The two units supplied in the same Midland BTX2 PRO S box, are already

paired and ready to use, this means you don’t need to perform this procedure.

The units are already paired using the Middle button.

If the devices are not part of the same kit, or the units has been purchased

separately, you need to ﬁrst pair them in order to use them.

To pair the Midland BTX2 PRO S to another Midland BTX2 PRO S unit

To pair the Midland BTX2 PRO S to another Midland BTX2 PRO S unit, you

must ﬁrst enter the setup mode:

1. Turn o the unit.

2. Press and hold down the middle button about 7 sec., until the Red light is

on permanently.

3. Now press the Middle button for 3 seconds. The Blue and Red lights will

ﬂash.

4. Do the same procedure on the other unit. When successfully paired, each

unit will have the Blue light on for one second and then go back to the setup

mode (Red light always on).

5. Now the pairing procedure is complete, you just need to exit the setup

mode before you can use the units.

6. Double click on the Middle button, the Red light will turn o and the Blue

light will start ﬂashing.

You can use now your Midland BTX2 PRO S

Attention: remember to switch o all the other Bluetooth devices that are not

part of the pairing procedure, only the two devices involved in the pairing must

be turned on.

How to use the Intercom with two units

To use the intercom feature, be sure that both units are turned on and cor-

rectly paired together.

Here is an example of the buttons main functionality based on the mode you are on.

Mode Forward (Left button) Middle button Rear (Right button)

Intercom Open/close the intercom to the ﬁrst rider Open/close the intercom to the second

rider

Open/close the intercom to the Third rider

Phone Redial last number/accept or reject

incoming call on “Vol+”

Redial last number/accept or reject

incoming call on “Vol-”

Phone (while music play) Forward the song Play/pause Backward the song

FM Radio Scan up FM Radio On/o Scan down

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland BTX2 PRO S Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland BTX2 PRO S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info