Bedienungsanleitung Midland BTX2 PRO S (Seite 27 von 124) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

738621

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

www.midlandeurope.com 25

request is coming.

In this way as soon as the ﬁrst conversation is over, the person can easily con-

tact the caller by opening the intercom of the speciﬁc button number (indica-

ted by the voice announcement).

Conference

The “Conference” mode allows the simultaneous communication between 4

people or, if you pair a intercom device also on “Vol-” , up to 8 people (4

couple). You can decide to use the BTX2 PRO S in “one to one” communi-

cation up to 6 people (“classic” Intercom mode) or with 8 people (4 couples)

conference intercom (Conference mode).

How to use the conference mode

First of all you need to pair all the units in a “chain” mode, second the “Confe-

rence” feature must be active on all the units paired.

Pairing

To use the conference mode you need to pair all the units in a “chain” conﬁgu-

ration. The BWD button of the ﬁrst unit must be paired to the FWD button

of the second unit. The BWD button of the second unit must be paired to the

FWD button of the third unit and so on, till the fourth!

The ﬁrst and the last unit must not be paired together (the chain must stay

open). The unit number 1 can talk to the last unit (number 4) only “through”

the unit number 2 and number 3. That means to have the conference with four

people, all the unit must have the intercom open.

Activate Conference mode

In any mode with no active audio, keep pressed the FWD and Central buttons

for 3 sec. The voice announcement “Conference” will tell you that it is active.

When the Conference mode is active the bluetooth devices paired on “Vol+”

button are disconnected, the paring on CTRL button and the Universal Inter-

com are not available. Now only the paring on FWD and BWD buttons are

available, together with the device paired on the “Vol -” button.

When in Conference mode, you can always move to “FM radio” mode to li-

sten your favorite radio station or to “Phone” mode to control the phone con-

nected on the “Vol-” button.

Disable Conference mode

In any mode with no active audio, keep pressed the FWD and Central buttons

for 3 sec. The voice announcement “Intercom” will tell you that you are back

to the “One to One” Intercom mode and the device connected to the “Vol

+” is available again, together with the Phone, the pairing on CTRL button and

the Universal Intercom.

Conference mode 4 people

When the conference mode is active, it is possible to open the conference

communication pressing both the FWD and BWD buttons. One click on the

button will open the intercom communication, one click on the same button

will close it. The two units that are in the middle of the chain (unit 2 and 3)

must keep the intercom open on both FWD and BWD buttons to allow the

full communication of the four units together.

“One Click Talk” function

When the conference mode is active, is possible to open the conference com-

munication to all the 4 users just in “one click”. Press short the CTRL (mid-

dle) button and you will automatically open the conference to the four units

connected.

1 2 3 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland BTX2 PRO S Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland BTX2 PRO S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info