Bedienungsanleitung Midland G9 (Seite 15 von 90) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

543265

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

ENGLISH

“CALL”

Push the CALL button and you will send an audio signal to the users tuned on the same channel; you can choose

amongst different CALL tones.

“Emergency”

When the Emergency function is enabled (EMG blinks on the display) keep pressed EMG for 3 seconds and you

send an emergency CALL to the other G9 within your range.

The Emergency function is activated by default.

Keypad lock

Keep pressed CALL/

CALL

EMG

4 6 8 7

for about 5 seconds. and

CALL

EMG

4 6 8 7

will be displayed as conrmation. Only PTT, EMG and CALL/

CALL

EMG

4 6 8 7

remain active. To disable this function, keep pressed again CALL/

CALL

EMG

4 6 8 7

for 5 seconds approx.

MON (Monitor) function / Squelch

The Monitor button is for temporarily excluding (opening) the squelch, in order to listen to signals that are too weak

to keep the squelch permanently opened.

To activate the monitor function, keep pressed for about 2 seconds both ▲▼ at the same time. Follow the same

procedure to deactivate the function, or switch off and on the radio.

! When MON is active, you will probably hear a constant background noise.

! You can activate the Monitor feature only if the “Emergency” function is disabled.

Scanning all the channels

Midland G9 can automatically search for signals throughout the bands by scanning the channels in rapid

sequence. This function is useful to nd out any active channel.

When a signal is detected, the scanning pauses on that channel for 5 seconds.

Press ▲ for 2 seconds: the scanning will start. To stop it, push PTT: the Midland G9 will go back to the channel

from which the scanning originally started.

! You can activate the scanning feature only if the “Emergency” function is disabled.

“MENU” key

The following features can be selected by using the “MENU” button:

› Channel selection

› CTCSS tone setting

› DCS tone setting

› High/low power selection (only in the PMR446 band)

› VOX

› VibraCALL function

› CALL melodies

› Roger Beep

› Keypad Beep

› Emergency channel

› Dual Watch function

› Out of Range

Channel selection

Press the MENU button. The number of the channel will start ashing on the display.

Press the scroll buttons ▼▲ till you select the desired channel. Press the PTT button to conrm, or wait for 5

seconds.

According to the version you bought, you can choose amongst the following channels:

› Dual band version: PMR446 from P1 to P8 and from 9p to 24p (pre-set) / LPD from 1 to 69.

› E version (PMR446 only): from P1 to P8 and from 9p to 24p (pre-set)

! Channel P8 has been set at factory for the “Emergency” function; we suggest that you do not use it for

general communications!

CTCSS/DCS tone setting

CTCSS and DCS tones are similar to access codes and enable the radio to communicate only with the users that

are tuned on the same channel and have set the same code. For each channel, you can set up to 38 CTCSS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland G9 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info