Bedienungsanleitung Midland G9 (Seite 17 von 90) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

543265

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

ENGLISH

The VOX sensitivity can be adjusted in 3 different levels. You can enable the VOX function with or without

accessories.

The fourth level activated is the Vox TalkBack: if one radio is continuously transmitting in VOX, the VOX TB will

automatically stop the transmission after 20 seconds to allow the transmission to the other users as well.

To activate the VOX function press the MENU button till VOX appears on the display.

Use ▲▼ to select the sensitivity levels:

› Of: Off;

› 1: High

› 2: Middle

› 3: Low

› 4: Talk Back (with high sensitivity)

To conrm your selection, press PTT or wait for 5 seconds.

To disable the VOX function, follow the procedure here above indicated and select oF.

Vibra-CALL function

Midland G9 is equipped with the “Vibra-CALL” feature, which provides a silent alert for incoming CALLs.

To activate this feature, press the MENU button until the display shows

CALL

EMG

4 6 8 7

; use the ▼▲ buttons to disable or

enable this feature (on: enables, oF:disables);

Push PTT [11] to conrm or wait for 5 seconds.

CALL feature

Midland G9 can send 5 different CALL tones. To send this audio signal to other users, press the CALL/

CALL

EMG

4 6 8 7

key.

To select the CALL tones:

Press MENU, until the display shows “CA” and the active tone code.

By pushing ▲▼ you will hear the 5 pre-set melodies.

Conrm by pressing PTT or wait for 5 seconds.

ROGER BEEP (End transmission tone)

When the PTT button is released, the radio will beep to conrm to other users that your transmission has

nished.

In the Midland G9 this function is factory disabled.

To activate it:

Press the MENU button until the display shows “rb of”; using the scroll buttons ▼▲ select “on” and “rb on” will

be displayed; to conrm the roger beep activation, press PTT or wait for 5 seconds.

Keypad Beep

Everytime a button is pressed, you will hear a beep.

To disable the beeps, follow this procedure:

› Press MENU, till the display shows “bP on”.

› Push ▲▼ till “bP of” is displayed.

› Conrm your selection by pushing PTT or wait for 5 seconds.

In this way, all beeps and tones are disabled.

To enable the keypad beep, repeat this procedure and select “bP on”

Emergency CALL function

The Midland G9 dedicates a channel to the Emergency calls: all the G9 operating within your range, even if tuned

on different channels, can receive/transmit Emergency messages on that channel.

If you keep pressed the EMG button, the communications automatically switch to the emergency channel (“EC”

on the display). An audio signal will be sent and all the G9 operating within the range will automatically go to the

Emergency channel (“EC”).

If you have disabled this function, you won’t receive/transmit any Emergency CALL.

! When the radio is operating on the Emergency channel (EC displayed), all the buttons except PTT and

CALL are disabled.

The G9 will return to the channel in use after one minute from the last transmission.

To return immediately, push EMG. Now you can use all the MENU functions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland G9 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info