Bedienungsanleitung Midland Ocean (Seite 18 von 26) (Englisch)

579587

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

ENGLISH

2) Press the or buttons to change the VOX mode to On or Off.

3) Press the button to conﬁrm the setting change and return to

Stand-by, or press the F key to access the following menu setting.

6.2.b Setting VOX sensitivity

Adjusting the VOX sensitivity avoids the likelihood of the radio going

into transmission mode because of environmental noise. As such, it

should be adjusted to the minimum level necessary to activate tran-

smission by voice.

1) Repeatedly press the F key until the LE (sensitivity level) icon

ﬂashes. The VOX icon and the sensitivity level currently selected

(from 01 to 06) will ﬂash on the display.

2) Press the or buttons to select the desired level (01 = more

sensitive, 06 = less sensitive).

3) Press the button to conﬁrm the setting change and return to

Stand-by, or press the F key to access the following menu setting.

6.2.c Setting VOX delay

During transmission with VOX, a delay avoids the possibility that, du-

ring short pauses in communication, this function does not return the

radio to reception mode. As such, this function should be set at the

minimum level necessary to guarantee this.

1) Repeatedly press the F key until the dL (delay) appears. The VOX

icon and the delay currently selected (from 01 to 06) will ﬂash on

the display.

2) Press the or buttons to select the desired delay time. Six delay

values are available, in increments of 0.5 seconds (01 = 0.5 secon-

ds, 06 = 3.0 seconds).

3) Press the button to conﬁrm the setting change and return to

Stand-by, or press the F key to access the following menu setting.

6.3 Scanning functions

6.3.a Scanning all channels

Ocean can automatically search for signals throughout the marine

band by scanning, i.e. selecting the channels in rapid sequence. When

a signal is detected, the scanning pauses on that channel and remains

blocked until the signal ends (for a maximum of ﬁve seconds), giving

the user a chance to respond to a call, if necessary, before Ocean

automatically begins scanning again. To begin scanning, follow the

steps outlined below:

1) Repeatedly press the F key until the Scan icon and the currently

selected channel begins ﬂashing on the display.

2) Press the or buttons to activate scanning. The transceiver will

begin to explore the marine band channels.

3) The transceiver will continue channel scanning until it picks up a

transmission. When this happens, the transceiver temporarily halts

scanning and remains tuned on that channel for about 5 seconds.

During this time, you have a few options:

• If the communication does not interest you, wait for 5 seconds

or press the or keys to begin channel scanning again.

• If the communication interests you, you can halt scanning by

brieﬂy pressing the or PTT buttons.

4) To exit the scanning mode and return to Stand-by on the currently

selected channel, press the button, or press the F button to

access the following menu setting.

Scanning can also be executed on commonly-used channels only.

For further details, refer to par. 6.5.c.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland Ocean Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland Ocean

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info