Bedienungsanleitung Midland Ocean (Seite 20 von 26) (Englisch)

579587

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

ENGLISH

5) Press the button to store the channel.

• To program another channel – repeat steps 1) to 5).

6.5.b Memory recall

To select a stored channel, follow the steps outlined below:

1) Repeatedly press the F key until the small memory number (from 01

to 20) and corresponding stored channel appear on the display.

2) Select the stored channel and push the PTT, your radio will operate

on that channel.

3) To exit this menu and return in “Stand-by” mode, press .

6.5.c Memory scanning

To scan the stored marine channels only, follow the steps outlined

below:

1) Repeatedly press the F key until the Mem and Scan icons are

ﬂashing simultaneously on the display.

2) Press the or buttons to activate scanning. The transceiver will

begin scanning only the programmed memories.

3) The transceiver will continue scanning the programmed memories

until it picks up a transmission. When this happens, the transcei-

ver will temporarily halt scanning, remaining tuned on that memory

channel for about 5 seconds. During this period, you have a few

options:

• If the communication does not interest you, press the or

buttons to begin memory scanning again.

• If the communication interests you, you can halt scanning by

brieﬂy pressing the button.

4) To exit the scanning mode and return to Stand-by on the currently

selected channel, press the button, or press the F button to

access the following menu setting.

6.6 Weather channel (only with the USA band)

This function is available only on the USA band (ref. par. 6.4). In the

United States, there are a few channels dedicated to weather informa-

tion reception (WX). To recall these:

1) Ensure you have selected the USA band.

2) Repeatedly press the F button until appears on the display with

the weather channel number.

3) Press the or buttons to select the desired weather channel.

4) To exit the weather channel and return to normal channel reception

mode, press the button, or press the F button to access the

next menu setting.

6.7 Automatic weather information warning

(detection of NOAA tone)

This function is available only on the USA band (ref. par. 6.4), and al-

lows for monitoring at regular intervals if a pre-selected weather chan-

nel emits weather information. When this function is active, during

normal functioning (on any USA marine band channel), the transceiver

will execute periodic controls on the pre-selected weather channel to

detect a particular signal (NOAA tone at 1050 Hz) emitted at the same

time as weather information. When Ocean detects a NOAA signal, it

will interrupt normal operations and move automatically to the weather

channel so you are able to listen to essential weather information.

To activate the automatic weather warning:

1) Select the weather channel you desire monitored, following steps 1

through 3 of par. 6.6.

2) Press the F button to access the next menu setting. The sym-

bol will ﬂash with Off (weather warning deactivated).

3) Press the or buttons to select the On (activated) setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland Ocean Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland Ocean

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info