Bedienungsanleitung Minolta Vectis 200 (Seite 2 von 4) (Englisch)

42268

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

FULL AUTO OPERATION-CONTINUED

2 . Insert the battery according to the + and –

marks inside the battery chamber and

snap the cover closed.

• After installing a new battery, reset the date and time.

Each time the camera is turned on, a symbol will appear briefly in the data

panel to indicate the power status of the battery.

Power is sufficient for all camera operations.

Power is sufficient, but the battery will have to be

replaced soon.

Replace the battery. The shutter will lock until the battery

is replaced.

Your camera uses IX240 type film designed for use in Advanced Photo System

cameras.

• Your camera’s automatic transport system loads the film, sets the film speed, and

advances the film after each exposure.

• After loading, the film chamber cannot be opened until rewind has been initiated.

• DEP, Double Exposure Prevention, prevents the camera from accepting exposed film.

• This camera will only load film with the ● mark current.

Visual Exposure Indicators

• The current VEI has a white indicator

behind it.

Hold the camera steady, making sure your

fingers do not cover the flash. If you are taking

a vertically framed picture, turn the camera so

the flash is on top.

3.Looking through the viewfinder, frame the

subject as desired.

Push the zoom lever toward W to zoom out.

Push the zoom lever toward T to zoom in.

• Do not obstruct the lens barrel during movement.

4.Center your subject in the focus frame, then

press the shutter-release button partway

down.

6.Turn the camera off after use by sliding the

front cover closed.

If your subject is located outside the focus frame, you can first lock focus on

your subject, then recompose the picture as desired.

Your camera automatically rewinds the film into the cassette after the last

exposure.

MANUAL REWIND

CHECKING THE BATTERY POWER

FOR CLOSER SUBJECTS

1.Align the subject within the focus frame and

press the shutter-release button partway

down until the ready lamp glows.

2. Without lifting your finger, recompose the

picture then press the shutter-release

button all the way down to take the picture.

FOCUS LOCK

1. Wait for the film to completely rewind into the

cassette.

• The frame counter will count down during rewind.

• will appear in the frame counter and will blink

when the film is rewound.

INSERTING THE BATTERY

REWINDING THE FILM

Your camera uses one 3-volt CR2 lithium battery

to supply power for all camera operations.

1.Open the battery-chamber door

using a coin or similar object.

1 . Turn the camera upside down and slide

the film-chamber release in the direction

indicated.

• The film-chamber door will open partway.

2 . Insert the cassette into the film chamber.

Use manual rewind to rewind the film before the roll is finished.

• If no display appears, replace the battery or check that it is inserted correctly.

• To save power, your camera will shut down and retract the lens if it is not operated for

more than eight minutes. Close, then open the front cover again to restore power.

When your subject is closer than 1.0m/3.28ft., align the top of your image with

the close-framing guide, using focus hold if necessary.

• The close-framing guide is not visible in P format.

The ready lamp will blink rapidly and the shutter will lock when you are closer

than the focus distance indicated below.

Focal Length Wide Telephoto

Print Format All C or H P

Focus Distance 0.5m - ∞ 0.5m - ∞ 1.0m - ∞

(1.64ft. - ∞) (1.64ft. - ∞) (3.28ft. - ∞)

5.When the green ready lamp glows, press

the shutter-release button all-the-way down

to take the picture.

• Press the shutter-release button with a slow, steady

squeeze, never a quick jab.

LOADING THE FILM

VEI MEANING

3 . Press the film-chamber door closed until it

clicks.

• The camera will automatically advance the film to the

first frame.

• The ISO (film speed) and number of frames remaining on the roll

will be displayed in the data panel.

• Film can be loaded when the camera is on or off.

• If film is loaded with the camera off, all indicators in the data

panel will disappear after the number of frames remaining is

displayed.

• Do not load film without an operational battery in the camera.

If blinks in the data panel, open the chamber, then

remove the film.

- Your camera cannot load a cassette if the current VEI is ◗, ✖, or ■.

- If a processed (VEI ■) or partially exposed (VEI ◗) cassette was

loaded into this camera, the VEI has been changed to ✖.

• If all indicators blink in the data panel, remove and reload the film. If

the film will not load, contact the nearest authorized Minolta Service

F a c i l i t y.

FULL AUTO OPERATION

1.Open the front cover to turn the camera on.

• The flash is set to autoflash and will fire when necessary.

2.Select the print format. The viewfinder will

change to match your selection.

2. Turn the camera upside down and open the

film chamber.

3.Remove the cassette.

• The film’s VEI indicator will be ✖.

• Do not open the film chamber until the motor stops and

appears and blinks in the data panel.

1.Gently press the manual rewind button.

2.Follow steps 1- 3 from automatic rewind.

• Film cannot be reloaded after it has been rewound.

Minolta Vectis 200 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info