Bedienungsanleitung Minox DTC 700 (Seite 29 von 60) (Deutsch, Englisch, Französisch)

625816

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Language setting

Since the Trail Camera DTC 700 comes with default

factory settings with an English menu, follow these

steps to make the right language selection:

1. Bring the main switch (11) to the switch setting

“SETUP” mode.

2. You will directly be brought to “manual activa-

tion” option in the camera.

3. Now press the menu key (8). You will be direc-

ted to the main menu of the camera.

4. Now press the the arrow key to the right (10) to

change the tab in the “Main Menu”.

Then press the arrow key (10) facing downward.

6. Now it shows the highlighted menu option

“Language”.

7. Press the OK button (9).

Using the down arrow key (10) select “German”

(highlighted).

9. Press the OK button (9).

10. The camera will return to the “Main Menu”. The

language has been set to “German”.

Mounting the camera

1. Mounting strap: Two strap mounts (17) are

attached to the rear side of the camera core to

mount the camera. The mounting strap included

in the delivered package is passed through both

mounts. The camera is fastened with the latch on

the mounting strap.

2. Tripod: The external case of the camera has 1/4”

tripod mount (18) at the backto fasten the came-

ra to the tripod.

Setup and operating mode

You camera has two mode settings:

1. Setup mode

Switch your DTC 700 camera to the “SETUP” mode

(SETUP = setup mode, main switch (11) centre).

You will be directed to the “Manual Controls” of

the camera. Press the menu button (8) to get to

the main menu of the camera. You can alternate

between 2 tabs in the main menu by activating

the right and left arrow keys (10). The tab currently

selected is highlighted in green. Under the ﬁrst tab

displaying the “Camera icon” you can adjust the

settings directly relevant to the functioning of the

camera. These tabs will hereinafter be referred to

as “camera settings”. The second tab showing the

“Hammer and Wrench icon” allows you to adjust

all the settings. This will hereinafter be referred

to as “General Settings”. This mode allows you

to program the camera and undertake all display

settings such as date, time, temperature, etc. that

are supposed to be displayed later on the pictures

or video clips. Use the Up/Down arrow keys (10)

to access the tabs for the individual menu options.

To change the tabs once a menu option has been

selected (highlighted), move the left arrow key (10)

once. The camera will return to the previous selec-

tion menu. Only that option is now lit green. Now

you can use the Right/ Left arrow key (10) to move

between the tabs “Camera Settings” and “General

Settings” in order to select the desired menu op-

tions with the Up/Down arrow keys (10).

2. Operation mode

Switch your DTC 700 camera to the “operation

mode” (ON = operation mode, main on/ off switch

(11) upper position). In this mode, your DTC 700

camera automatically accepts the new settings you

previously programmed in the “SETUP” mode.

Menu functions and settings

Manual Controls

This setting offers you the possibility of using your

DTC 700 like a normal digital camera. As in any

other normal digital camera, you can view the di-

gital stills and video clips on the display monitor

and accept them at the same time. Once your DTC

700 is in the “SETUP” mode (see the section on

Setup and Operation mode), it is immediately in

the “Manual Controls” mode. You can use the right

(photo) and left (video) arrow keys (10) to move

between the “photo” and “video” mode. You can

change the image resolution of the picture by repe-

Note: The blue activating LED (4) will blink for a

few seconds before the camera is ready for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Minox DTC 700 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info