Bedienungsanleitung Mitsubishi FD630U (Seite 17 von 46) (Englisch)

493662

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

EN-17

ENGLISH

Basic operation (continued)

How to change the settings:

With the remote control:

1. Press the ASPECT button.

• Every time the ASPECT button is pressed, the aspect mode

changes from AUTO to 16:9, to REAL, and back to AUTO.

With the FEATURE menu:

(See page 21 for menu setting.)

1. Display the FEATURE menu.

2. Select ASPECT by pressing the S or T button.

3. Select your desired aspect ratio by pressing the W or X button.

To cancel the menu:

4. Press the MENU button.

Important:

• When a 4:3 image is kept displayed for a long time before display-

ing 16:9 image, the afterimages of the black bars may appear on

the 16:9 image screen. Consult your dealer in this case.

Caution:

• After using the projector, wait one minute for the air outlet fans to

stop in normal use. Then unplug the power cord from the wall out-

let.

• The lamp can’t be lit again for one minute after turned off for safety

purpose. It will take another one minute for the STATUS indicator

to go out. If you want to turn on the projector again, wait until the

indicator goes out, and then press the POWER button.

• The air outlet fans rotate faster as the temperature around the pro-

jector rises.

• When the temperature around the projector rises high, the sign

"TEMPERATURE!!" blinks red on the screen. If the temperature

stays high, the lamp will go out automatically.

Important:

• Do not display a still picture for a long time because the afterim-

ages may persist on the screen.

Wall Screen

This function is to reproduce natural color tones when images are pro-

jected directly onto a screen or wall surface. You can select from

BEIGE, LIGHT BLUE, LIGHT GREEN, PINK, BLACK BOARD, WHITE

BOARD, and OFF, to match the color of the screen or wall to be used

for projection.

1. Display the INSTALLATION menu. (See page 22 for more details.)

2. Press the S or T button to select WALL SCREEN.

3. Press the W or X button to select the color closest to that of the

screen on which images are projected.

• When the GAMMA mode setting is changed, images may not

be displayed correctly.

• When OFF or BLACK BOARD/WHITE BOARD is selected,

the density cannot be adjusted.

• When WHITE BOARD is selected, BrilliantColor

in the

Color Enhancer menu of the Image menu cannot be used.

Additionally, Theater in the Color Enhancer menu of the

Image menu has no effect and is automatically canceled

when WHITE BOARD is selected.

4. Press the ENTER button.

5. Press the W or X button to adjust the density of the selected

color.

When connecting to a laptop computer:

When this projector is connected to a laptop computer, there may be

times when images may not be projected. When it occurs, set the

computer so that it can output signals externally. The procedure varies

across computers in use. See the instruction manual of your com-

puter.

AUTO

ASPECT

FEATURE

opt.

LAMP MODE

ANDARD

WALL SCREEN

BEIGE

opt.

INSTALLATION

LIGHT BLUE 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi FD630U Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info