Bedienungsanleitung Mitsubishi FDTC35VF (Seite 5 von 24) (Englisch)

604739

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Ventilation display

Displayed during ventilation operation

☞ See page 12

Weekly timer display

Displays the settings of the

weekly timer.

Operation setting display area

Displays setting temperature, airflow

volume, operation mode and operation

message.

Operation/check indicator light

During operation: Lit in green

In case of error: Flashing in red

Operation/stop button

This button is used to operate and stop

the air conditioning system.

Press the button once to operate

the system and press it twice

to stop the system.

MODE button

This button is used to change the

operation mode.

FAN SPEED button

This button is used to set the airflow

volume.

VENT button

This button is used to operate external

ventilator. ☞ See page 12

LOUVER button

This button is used to operate/stop the

swing louver. ☞ See page 11

SET button

•This button is used to fix the setting.

•This button is used to set the silent mode.

☞ See page 5 to 12

RESET button

•If you press this button while making settings,

you can go back to the previous operation. ☞ See page 5 to 12

•This button is also used to reset the “FILTER CLEANING” display.

(Press it after cleaning the air filter)

Central control display

Displayed when the air conditioning system is

controlled by centralized remote control.

Timer operation display

Displays the timer operation setting.

Temperature setting buttons

These buttons are used to set the

temperature of the room.

Timer button

This button is used to set

the timer mode.

☞ See page 5

Timer setting buttons

These buttons are used to set

the timer mode and the time.

☞ See page 5 to 12

E.S.P. button

This button is only used by service

engineers for installation purposes.

AIR CON No. button

•Display the indoor unit number connected to this

remote control.

•This button is used for indoor unit address setting.

CHECK button

This button is only used by service engineers

for installation purposes.

TEST button

This button is used during test operation.

NAMES AND FUNCTIONS OF REMOTE CONTROL BUTTONS (WIRED REMOTE CONTROL)

Wired remote control

• Thefigurebelowshowstheremotecontrolwiththecoveropened.Notethattheitemsintheliquid

crystaldisplay(LCD)areaareshownforexplanationpurpose.

Pull the cover downwards to open.

HOW TO USE< WIRED REMOTE CONTROL >

PRECAUTIONS FOR WASTE DISPOSAL

Your Air Conditioning product may be marked with this symbol. It means that waste electrical and

electronic equipment (WEEE as in directive 2012/19/EU) should not be mixed with general household

waste. Air conditioners should be treated at an authorized treatment facility for re-use, recycling and

recovery and not be disposed of in the municipal waste stream. Please contact the installer or local

authority for more information.

PRECAUTIONS FOR RELOCATION

OR REPAIRING

CAUTION

Neverperformany

modification.Contact

yourdealerforrepairing.

Improper repairing may lead to

water leakage, electric shock

or fire. Normally the refrigerant

does not leak. But if it leaks

and contacts fire such as

fan heater, space heater or

cooking heater, it may produce

toxic chemicals. When repairing

refrigerant leakage, determine

the service with the service

staff that the repair has been

finished without fault.

Ifitisrequiredto

relocationandreinstall

theunit,consultyourdealer

oraspecialist.

Improper installation of air

conditioning unit may cause

water leakage, electric shock

and/or fire.

Beforerepairingor

checkingindoorunit,be

suretoturnoff“Indoorunit

powersupplybreaker”.

It can result in electric shock or

injury due to rotation of indoor

unit fan if you perform check

or repair with the “Indoor unit

power supply breaker” turned

on.

Placethepanelsremoved

forrepairingorchecking

onthestablespot.

Otherwise, dropping or falling

may lead to injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi FDTC35VF Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi FDTC35VF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info