Bedienungsanleitung Mitsubishi FDTC35VF (Seite 6 von 24) (Englisch)

604739

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL >

1 Press TIMER button.

The mode changes to timer mode.

“Current day of the week” and “Current time ” are displayed.

[EXAMPLE] Sunday : 1 o’clock in the afternoon

Display area : [

]

[ ]

[ ] (lights)

2 Press ▲ or ▼ button.

By pressing ▼ or ▲ button, it is possible to choose the item to set.

[

] (set to current time)



[

] (Every operation stops after a certain period

of time has elapsed.)



[

] (The unit stops operating at the setting

time.)



[

] (The unit starts operating at the setting

time.)



[

] (Timer set for each day of the week)



[

] (Cancel the timer setting)

If you press the

RESET button, timer mode ends and return

to original status.

3 Press SET button.

The selected timer mode is set.

For setting of each timer mode, see the following pages.

The possible combination of the timer function is mentioned in the

following table.

Combination of modes that can be set together

(: possible ×: impossible)

• If you select a combination of modes that cannot be set together

and press the

SET button, the message “

(invalid operation)” is displayed for 3 seconds and then the

display returns to the one selected in step 2.

2 1

• If you press button while timer mode is under setting, timer mode is canceled and the display will return

to the original one. Note that the setting which has not completed is canceled.

• If you have set the ON timer mode and either the OFF timer or Sleep timer mode at the same time, the OFF timer

(or Sleep timer) precedes the ON timer.

• If you press the

Timer button and “ ” is displayed, the button can not be operated because the

button operation is disabled. If you want to make the button effective , consult your dealer.

• If you do not press any button for several minutes after pressing the

Timer button, Timer mode ends and the

display returns to the original one.

• When the weekly timer setting recovers from power failures, the setting data (four settings per day) remain stored,

but holiday settings will automatically override the settings for each day.

THE SELECTION OF TIMER MODE

Functions of each timer operation

Sleep timer•

When the specified period of time elapses, operation

stops.

10 settings are available, from “an hour later OFF” to “10

hours later OFF”.

The unit will stop when the setting time is reached.

OFF timer•

The unit stops operating at the setting time.

It will operate one time per setting.

ON timer•

The unit starts to operate at the setting time. The

temperature can be set together. It will operate one time

per setting.

Weekly timer•

You can set up to four ON/OFF timers per day.

Once Weekly timer is set, it repeats every week.

HOW TO OPERATE < WIRED REMOTE CONTROL >

NOTICE

There may be a case that “• ” is displayed when any

button mentioned in the above is pressed, but it is not a malfunction.

In that case, the operation of the button is prohibited.

When you start to operate the unit for the first time after turning the •

power supply on, the default settings are listed below. You can change

them as you like.

Central control ......................Turned off

Operation changeover .......... With auto mode : auto cooling

Without auto mode : cooling

Set temperature ...................23°C

Fan speed ............................

Louver position .....................Horizontal

ATTENTION

1 Press button.

The unit starts operating.

2 Press MODE button.

The range of operation mode is displayed according to the model

of indoor unit.

Every time the button is pressed, the display changes in the

following order: dry



cool



fan



heat



auto.

(EXAMPLE display for auto-operation enabled)

•

With auto operation,

heating and cooling is

automatically changed

depending on difference

between the setting

temperature and sucking

room air temperature.

3 Press TEMP button.

Press or button to set the room temperature.

4 Press FAN SPEED button.

The range of fan speed modes is displayed according to the model

of indoor unit.

At 4-speed .............“ ↔ ↔ ↔ ”

At 3-speed .............“ ↔ ↔ ”

At 2-speed .............“

↔ ” or “ ↔ ”

At 1-speed .............The operation is invalid

at 4-speed

The unit operates with the maximum fan speed.

5 Press LOUVER button.

If the indoor unit is equipped with the auto swing function, press

the LOUVER button once and current louver status is

displayed.

If the indoor unit is not equipped with the auto swing function, the

message “ ” is displayed.

For the louver operation •

☞

See page 11 to 12

1 Press LOUVER button, and change the display to

 

For the louver stopping •

☞

See page 11 to 12

1 Press once while the louver is operating to display stop

positions in order.

2 Press the button once more at the preferred stop position to

stop the louver at that position.

Effective stop position

☞

See page 11 to 12

For automatic operation: ............................... middle

For cooling/dehumidifying operation: ............ Horizontal

For heating operation: ................................... downwards

Stop

Press button

2 4 5

Setting

temperature

Fan speed

mode

Operation

mode

 Guideline for room temperature setting

COOL ...............26 to 28°C

DRY ..................21 to 24°C

HEAT ................22 to 24°C

FAN ...................Setting unnecessary

• The settings of operation change, temperature

and air flow volume adjustment can be changed

even when the air conditioner is stopped. When a

button is pressed while the operation is stopped,

the corresponding display is turned on and you

can change the setting. The display lights for three

seconds after changing the setting, and then turns

off automatically.

• In order to protect both indoor/outdoor air conditioners, keep the power supply on for six hours before initial operation. (The

crank case heater is energized in order to heat up the compressor.) Do not turn off the power supply. (Power is distributed to

the crankcase heater, even if the compressor is stopped. This keeps the compressor warm, and prevents failures caused by

accumulation of liquid refrigerant.)

cooling operation

heating

operation

room setting

temperature

Operation mode

DRY

COOL

FAN

HEAT

AUTO

NOTICE

OFF timer



Sleep timer



Weekly timer

ON timer



Sleep timer

OFF timer

ON timer

Weekly timer

Mitsubishi FDTC35VF Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi FDTC35VF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info