475236
26
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
26 3. TV Features
For assistance call 1(877) 675-2224
To display 3D content, your Mitsubishi TV requires:
Active-shutter 3D glasses compatible with any one
of the following:
- The TV’s internal emitters
- A matching external synchronization emitter
connected to the TV’s back panel
-DLP link
Glasses compatible with the TVs internal emitters
are:
- XPAND model 3DG-X103 IR glasses made for
Mitsubishi 3D TVs
- XPAND model X103 Universal IR glasses
For more information, visit the 3D TV page at
www.mitsubishi-tv.com.
A compatible 3D source device connected to the
TV via HDMI or StreamTV internet and outputting a
3D signal in one of these formats:
- Frame Packing 1080p/24-Hz or 720p/60-Hz
- Top-Bottom 1080p/24-Hz or 720p/60-Hz
- Side-by-Side format, 1080p, 24/30/60-Hz;
720p, 60-Hz
- Checkerboard format, 1080p, 60-Hz; (lower resolu-
tions may be supported but will not fill the screen)
Initial Setup
1. If your 3D glasses came with a synchronization emitter,
connect the unit to the 3D GLASSES EMITTER jack.
Place the emitter at the front of the TV where there is a
clear path to the glasses.
Note:
No emitter is required if using the TV’s internal
emitters or DLP Link.
3D
GLASSES
EMITTER
Connecting an
external emitter
2.
Power on the TV and the source device.
3.
Connect the source device to the TVs HDMI input.
4.
When the New Device Found screen displays,
name the input.
5.
Press
EXIT
to close the New Device Found screen.
3 D Video
Use the Picture > 3D Mode menu to enable 3D video.
Choice of Source Formats
If your device is not HDMI 1.4a
compliant, you must choose the
correct setting from this list.
Off
Turns off 3D images; displays 3D content
as 2D (you may see two images).
Restores normal TV adjustment options
when viewing an ordinary 2D signal.
Automatic
Switches the TV to 3D mode and selects the
correct 3D format when the TV detects a 3D
signal from an HDMI 1.4a-compliant device.
Automatically switches the TV out of 3D
mode when receiving a normal 2D signal.
Notes on the TVs Internal Emitters
POWER
Internal IR
Emitters for 3D
Glasses
If using glasses
compatible with the TV’s
internal IR emitters, keep
a clear path from the
glasses to the emitter.
35°
20°
35°
20°
16 ft.
16 ft.
16 ft.
25 ft.
25 ft.
Effective range of the
emitters in the vertical
and horizontal planes
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi L75-A94 Laservue wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info