475236
27
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
3. TV Features 27
For assistance call 1(877) 675-2224
3 D Video, continued
Notes on Using 3D Video Settings
3D signals and 3D settings affect some TV functions.
Switch to a non-3D source to regain full TV operation.
If Source Format is set to Automatic or one of the
named 3D formats OR Source Format
is set to
Off
and
the 3D video source is HDMI 1.4a compliant (picture may
appear as 2D), the following limitations apply:
Picture adjustments are limited. To make picture
adjustments while watching normal 2D images from
the device, temporarily set Source Format to Off to
make the full range of adjustments accessible.
While receiving a 3D signal,
-The
FORMAT
key is disabled.
-The
INTERNET
key is disabled.
Other Options in the 3D Menu
Glasses
Control Off
Settings
The Off settings disable output
from the selected emitter. Use Off
in the unlikely event of IR interfer-
ence with other devices.
2D+ Depth When selected, generates a simu-
lated 3D image from an ordinary
2D image. Requires use of active-
shutter 3D glasses.
Watching 3D Video
Active 3D glasses are required. All glasses in use
at the same time must use the same control type.
Halogen lights, fluorescent lights, or direct sunlight can
interfere with operation of the glasses.
1.
Switch the TV to the 3D video device. Press
INPUT
then highlight the icon for the 3D video device. Press
ENTER
.
Note: Before watching 3D images from an internet
source, it is important to establish the internet
connection fi rst before enabling 3D mode.
2.
Press
MENU
and select the Picture > 3D Mode menu.
3.
For Source Format, select Automatic and press
ENTER
. Press
EXIT
to close the menu.
If the image looks correct, the device is HDMI
1.4a compliant; always keep the setting at
Automatic for this device.
For non-compliant 3D sources, open the
Picture > 3D Mode menu and select a source
format based on how the picture looks:
Side by Side
Two images, screen
split vertically
Top/Bottom
Two images, screen
split horizontally
Checkerboard
Blurry double image
(always required for
checkerboard signals)
4.
Press
EXIT
to close the menu.
5.
If the image does not appear correct
(e.g., objects
appear to be moving in instead of out),
open the
Picture > 3D Mode menu. Highlight the Reverse
setting for the current control type and press
ENTER
to add a check.
6.
When finished watching 3D video:
If your 3D video device is HDMI1.4a compliant,
keep the setting on Automatic.
If you manually selected a source format in the
Picture > 3D menu, open the menu again and
select Automatic or Off.
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi L75-A94 Laservue wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info