475236
29
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
Appendices 29
For assistance call 1(877) 675-2224
Appendix A: Auto Input Sensing
About Auto Input S ensing
This TV’s Easy ConnectAuto Input Sensing feature
detects the following connections automatically:
Analog video jacks
HDMI inputs (when powered on)
USB device containing photo and music files (JPG
and MP3 formats).
Auto Input Sensing for Most Devices
When you first connect a device, the TV will:
a. Detect the connected device and automati-
cally switch to it.
b. Prompt you to identify the device type.
c. Repeat these steps for other newly detected
devices.
When You First Connect a Device
Most Device Types. Select the device type from
the on-screen list. The device type you select here
will appear as an icon in the Input Selection menu.
A/V Receiver.
For an HDMI-equipped A/V
receiver, select AVR
from the list of device types if
the A/V receiver is not recognized automatically.
HDMI CEC Devices Compatible with the
TV’s HDMI Control Feature.
Compatible
CEC-enabled HDMI devices are often recognized
automatically by the TV.
HDMI Control may allow
you to control some functions of a CEC-enabled
device. See the supplemental Owner’s Guide at
www.mitsubishi-tv.com.
New Device Found screen for a device with HDMI
control enabled. Select On if you want to enable the
TVs HDMI control of the device. In some cases, as
in the example, you will also be prompted to select a
device name.
Tips on Auto Sensing
Choose a different name for each input.
The antenna (
ANT
) input is never detected. It can
be turned off in the Inputs > Name menu.
Change the device type displayed in the Input
Selection menu by using the Inputs > Name
menu.
Some HDMI devices can automatically tell the TV
what name to use in the Input Selection menu
and you will be unable to change the name.
The TV is unable to detect a new connection if the
current input is USB or internet. Switch to a dif-
ferent input before connecting.
Reactivating Auto Input Sensing for an HD MI Input
After you disconnect an HDMI device, Auto Input
Sensing is temporarily disabled and the disconnected
device still appears in the Input Selection menu.
Perform these steps:
1.
Power off the device.
2.
Disconnect the HDMI cable.
3.
Press
MENU
on the TV remote control to enter the
TV main menu.
4.
Go to Inputs > Name.
5.
Highlight the HDMI input name and press
ENTER
to
select Delete.
6.
Press
EXIT
to clear the menus.
Inputs > Name menu with Delete selected for
HDMI-3.
7.
Connect the new device and the New Device
Found screen will display.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi L75-A94 Laservue wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info