Bedienungsanleitung Mitsubishi LU (Seite 15 von 76) (Englisch)

549864

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN-15

Setting up your projector (continued)

• When the KEYSTONE-mode adjustment is

performed, the displayed image may be distorted.

• Depending on the installation conditions of the

projector and the screen, a perfect rectangular

image and the proper aspect ratio may not be

obtained. Slight distortion can be corrected by the

CORNERSTONE-mode adjustment.

• Noise may appear on the screen during the

KEYSTONE-mode adjustment because of the type

of the video signal being projected and the setting

values of the KEYSTONE-mode adjustment. In

such cases, set the KEYSTONE-mode adjustment

values in the range where the image is displayed

without noise.

• When you carry out the KEYSTONE-mode

adjustment and the CURVED-mode adjustment

in combination, the adjustment range becomes

narrower than that in the case where you carry out

these adjustments individually. When setting the

KEYSTONE-mode adjustment value to 11 or larger,

you cannot use the CURVED-mode adjustment.

• When carrying out the KEYSTONE-mode

adjustment while the option lens is in use, you

may not be able to obtain a perfectly rectangular

image or the correct aspect ratio. Slight distortion

can be corrected by the CORNERSTONE-mode

adjustment.

Adjustment using the CORNERSTONE mode:

Use this adjustment for ﬁ ne adjustment of the image

shape. You can use this adjustment for adjusting

the image displayed in the edge blending mode

(see page 36), too. For adjustment, press the

ENTER/GEOMETRY button on the projector or the

GEOMETRY button on the remote control to display

the CORNERSTONE mode and then press the , ,

 or  button.

CORNERSTONE

LOWER RIGHT

SELECT : BLANK

: 0

Every time you press the BLANK button, the

adjustment menu changes as follows:

LOWER RIGHT  LOWER LEFT  UPPER RIGHT 

UPPER LEFT  RESET  LOWER RIGHT ...

LOWER RIGHT, LOWER LEFT, UPPER RIGHT, or

UPPER LEFT menu

You can adjust the horizontal or vertical position of the

selected corner.

Example: Adjustment of the upper left corner position

(UPPER LEFT)

Press the



button.

Press the



button.

Press the



button.

Press the



button.

When you press the  or  button in the RESET

mode, the distortion correction is reset.

Important:

• When the CORNERSTONE-mode adjustment takes

effect, the resolution decreases. In addition, stripes

may appear or straight lines may bend in images

with complicated patterns. They are not due to

product malfunctions.

• When the CORNERSTONE-mode adjustment is

performed, the displayed image may be distorted.

• Noise may appear on the screen during the

CORNERSTONE-mode adjustment because

of the type of the video signal being projected

and the setting values of the CORNERSTONE-

mode adjustment. In such cases, set the

CORNERSTONE-mode adjustment values in the

range where the image is displayed without noise.

• Large distortion of the image shape or aspect ratio

may not be corrected by the CORNERSTONE

-mode adjustment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi LU Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi LU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info