Bedienungsanleitung Mitsubishi Outlander Sport - 2014 (Seite 72 von 384) (Englisch)

617119

Zoom out

Zoom in

Vorherige Seite

1/384

Nächste Seite

Keyless entry system (if so equipped)

Features and controls 5-9

N00543700034

If you are near your vehicle and feel threat-

ened, you may acti-vate the alarm to call

attention as follows:

1. Press the PANIC button (3) for more than

1 second.

2. The headlights will blink on and off and

the horn will sound intermittently for

about 3 minutes.

3. To turn off the alarm, press any button on

the remote control transmitter.

N00543800051

Only remote control transmitters pro-

grammed with the vehicle’s electronics can

lock or unlock all doors and the liftgate.

If you lose the remote control transmitter, you

can order a remote control transmitter from

your authorized Mitsubishi Motors dealer by

referring to the key number.

To prevent vehicle theft, the ID code for the

remote control transmitter must be changed.

Take your vehicle and all remote control

transmitters to your authorized Mitsubishi

Motors dealer to have your ID code changed.

N00543900049

To add a remote control transmitter, you must

already have 1 registered remote control

transmitter.

Registering the ID code can be done by your-

self or by your authorized Mitsubishi Motors

dealer. For you to register the ID code your-

self, follow the “Customer remote control

transmitter programming” procedure below.

If you choose to have your authorized

Mitsubishi Motors dealer register the ID

code, take your vehicle and any remaining

keys to your authorized Mitsubishi Motors

dealer.

N00544001116

You can program new remote control trans-

mitters to the system if you have one valid

(already registered) remote control transmit-

ter by doing the following:

1. Have available all (current and new)

remote control transmitters you wish to

2. With a valid (already registered) remote

control transmitter, press and hold the

UNLOCK button (2) for 4 to 10 seconds.

Then press and hold the LOCK button (1)

during this time.

3. Within 10 seconds of pressing the LOCK

button, release the LOCK button first, and

then release the UNLOCK button.

At this time, ID codes for all remote con-

trol transmitters except for the transmitter

used in steps 2 and 3 are erased and the

answerback function (door is locked and

unlocked) informs you that the registra-

tion mode has been activated.

4. Within 60 seconds after step 3, complete

the following ID code registration opera-

tion using the next remote control trans-

mitter you wish to register within 4

seconds.

i) Press and hold both the LOCK and

UNLOCK buttons for 2 seconds.

ii) Release both the LOCK and UNLOCK

buttons simultaneously for 1 second.

iii) Press the UNLOCK button. The

answerback function informs you that the

ID code registration of the transmitter is

completed.

Using the panic alarm

Replacement remote control

transmitters

Additional remote control

transmitters

NOTE

 You are provided with 2 remote control

transmitters, but you may register up to 8

remote control transmitters.

Customer remote control trans-

mitter programming

BK0202700US.book 9 ページ２０１３年３月２８日　木曜日　午前１１時５４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi Outlander Sport - 2014 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info