Bedienungsanleitung Mitsubishi Outlander Sport - 2014 (Seite 73 von 384) (Englisch)

617119

Zoom out

Zoom in

Vorherige Seite

1/384

Nächste Seite

Keyless entry system (if so equipped)

5-10 Features and controls

5. To register the ID codes of additional

remote control transmitters, repeat step 4

within 60 seconds after step 4.

6. If no ID code of a remote control trans-

mitter is registered within 60 seconds

after step 4, the registration mode is can-

celed and the normal mode returns.

N00546101137

Your keyless entry system operates on a radio

frequency subject to Federal Communica-

tions Commission (FCC) Rules (For vehicles

sold in U.S.A.) and Industry Canada Rules

(For vehicles sold in Canada). This device

complies with part 15 of FCC Rules and

Industry Canada licence-exempt RSS stan-

dard(s).

Operation is subject to the following two con-

ditions.

 This device may not cause harmful inter-

ference.

 This device must accept any interference

received, including interference that may

cause undesired operation.

N00544100080

1. Before replacing the battery, remove static

electricity from your body by touching a

metal grounded object.

NOTE

 For verification purposes, try to lock and

unlock the doors with the re-coded remote

control transmitters after the registration is

completed.

 The indicator light (4) comes on each time a

button is pressed.

 The keyless entry system does not work if

the key is in the ignition switch.

 The remote control transmitter can be used

from about 40 feet (12 m) away. However,

this distance may change if your vehicle is

near a TV transmitting tower, a power sta-

tion, or a radio station.

 If the UNLOCK button (2) is pressed when

all doors and the liftgate are locked and no

doors or the liftgate are opened within about

30 seconds, the doors and the liftgate will

automatically re-lock.

 If the following conditions are observed after

pressing the LOCK (1) or UNLOCK (2) but-

ton on the remote control transmitter, the

battery in the remote control transmitter may

need to be replaced.

• The doors and the liftgate cannot be locked

or unlocked.

• The panic alarm cannot be operated.

• The indicator light (4) is dim or does not

come on.

 If you lose your remote control transmitter,

please contact an authorized Mitsubishi

Motors dealer for a replacement.

 If you wish to obtain an additional remote

control transmitter, please contact an autho-

rized Mitsubishi Motors dealer. A maximum

of 8 remote control transmitters can be pro-

grammed for your vehicle.

 To use the new remote control transmitters,

it is necessary to register the key with both

the electronic immobilizer and keyless entry

system.

Also refer to “Electronic immobilizer (Anti-

theft starting system): Customer key pro-

gramming” on page 5-6.

General information

NOTE

CAUTION

 Changes or modifications not expressly

approved by the manufacturer for compli-

ance could void the user’s authority to oper-

ate the equipment.

Procedure for replacing the

remote control transmitter bat-

tery

BK0202700US.book 10 ページ２０１３年３月２８日　木曜日　午前１１時５４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi Outlander Sport - 2014 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info