Bedienungsanleitung Mitsubishi RC-EX3 - REMOTE CONTROL (Seite 30 von 46) (Englisch)

805477

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

−29−−28−

When one IU is controlled with 2 R/Cs, the following

settings cannot be made on the sub R/C. It is necessary

to use the main R/C.

In case of the sub R/C, the icon S is displayed on the

R/C screen.

R/C operations Main Sub

Run/Stop, Change set temp, Change ﬂap direction, Auto swing, Change fan speed operations ○ ○

High power operation, Energy-saving operation ○ ○

Silent mode control ○ ×

Useful functions Individual ﬂap control ○ ×

Anti draft setting ○ ×

Timer ○ ○

Favorite setting ○ ○

Weekly timer ○ ×

Home leave mode ○ ×

External ventilation ○ ○

Select the language ○ ○

Energy-saving setting ○ ×

Filter Filter sign reset ○ ○

User setting Initial settings ○ ○

Administrator settings Permission/Prohibition setting ○ ×

Outdoor unit silent mode timer ○ ×

Setting temp range ○ ×

Temp increment setting ○ ×

Set temp display ○ ○

R/C display setting ○ ○

Change administrator password ○ ○

F1/F2 function setting ○ ○

Restrictions on the sub R/C

Direction

Cooling

15：54

(Mon)

F1: High power F2: Energy-saving

Timer

Now stopping.

Set temp

4. Menu operations

Operations on menu screens

1 Tap the Menu button on the TOP screen.

Main menu screen is displayed.

When a desired menu item is tapped, setting screen for each item is displayed.

When there are two or more pages, the Next button is displayed at the leading page and the Previous button is

displayed at the last page. The Next and Previous buttons are displayed on pages in between.

2 When the Next button is

tapped, next main menu screen is

displayed.

3 When the Back button is tapped, the

display returns to the TOP screen.

4 When the Set button is displayed

on the setting screen for each item,

tapping this button conrms the

setting.

■If you tap Back without tapping the

Set button, the settings made will not

be applied, and the display returns to the

original screen.

Direction

Cooling

16：14

(Mon)

F1: High power F2: Energy-saving

Timer

Now stopping.

Set temp

Useful functions

Energy-saving setting

Filter

User setting

Service setting

Next Back

Select the item.

Contact company

Previous Back

Select the item.

Change set temp

Auto

Set

Back

OutdoorRoomR/C

Tap

▲▼

to set temp & tap [Set].

5 When an item is referenced to

Administrator password in this

manual, the Input password screen is

displayed after selecting the menu.

Enter the administrator password

(4-digit number) and tap the Set

button.

When the password is unknown or

wrong, the setting cannot be changed.

· The administrator password is provided so that these operations and settings are restricted to administrators/managers only (such as the owner of the building).

· For the administrator password at the factory setting, refer to the Installation Manual.

When your administrator password is forgotten, initialize the password by referring to the Installation Manual.

Advice

Input password

Back

Set

Delete

Input the administrator password.

Input 4 digit number & tap [Set]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi RC-EX3 - REMOTE CONTROL Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi RC-EX3 - REMOTE CONTROL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info