Bedienungsanleitung Mitsubishi RC-EX3 - REMOTE CONTROL (Seite 33 von 46) (Englisch)

805477

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

−31−−30−

3 The same setting method as the

Setting in the cooling operation can be

applied to the Setting in heating.

2 Set desired time and temperature with

the ▲ ▼ buttons.

When the Set button is tapped,

contents of setting are conrmed, and

the display returns to the last previous

screen.

When the No setting button is

tapped, “

min.

°C” is displayed,

and the “Automatic temp set back” is

not performed.

1 Tap the Menu button on the TOP screen and select

Energy-saving setting

⇒

Automatic temp set back

. The

Automatic temp set back screen is displayed.

Tap Setting in cooling when setting for the cooling operation or Setting in heating when setting for the heating operation.

The Setting in cooling operation includes the cooling, dry and auto.

The Setting in heating is for the heating operation only.

Setting time range: 20 - 120 min, at 10-min intervals

Set temp range: It can be set within the preset temp range set according to the set temp range menu.

■Automatic temp set back

It returns to the set temperature when the set time is counted up.

Automatic temp set back

Setting in cooling

Setting in heating

Back

Select the item.

No setting

Setting in cooling

Set Back

Set the time & temp to return.

min. °C

No setting

Setting in heating

Set Back

Set the time & temp to return.

min. °C

1 Tap the Menu button on the TOP screen and select Energy-saving setting ⇒ Infrared sensor control .

The Infrared sensor control screen and contents of the current settings are displayed.

① Enable/disable power control.

② Enable/disable auto-off.

③ After you set each item, tap the Set button.

The display returns to the Energy-saving setting menu screen.

・ When auto-off is enabled

The unit will enter the “Operation wait” state when an hour has elapsed since the last time a human presence was detected and

will be in “Complete stop” state after another 12 hours.

"Operation wait"... The unit stops but will resume operation when human presence is detected.

When the unit is in “Complete stop”, “In auto-off mode” will be displayed on the message display.

"Complete stop"... When auto-off is enabled, the unit stops.

The unit will not resume operation even when human presence is detected.

The message “In auto-off mode” will disappear from the message display, and the operation lamp will turn off.

・When power control is enabled

The amount of human motion is detected by a motion sensor to adjust the Set temp.

During power control, “Power control ON” will be displayed on the message display.

■

Infrared sensor (motion sensor) control (for IUs with motion sensors)

Presence of humans and the amount of motion are detected by a motion sensor to perform various controls.

■When the R/C is set as the sub R/C, the infrared sensor (motion sensor) control cannot be set.

Direction

Heating

20：20

(Tue)

F1: High power F2: Energy-saving

Timer

Power control ON

Set temp

Direction

Cooling

16：32

(Mon)

F1: High power F2: Energy-saving

Timer

In auto-off mode

Set temp

Infrared sensor control

Set Back

EnableDisable

Select the item.

Power control

Auto-off

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi RC-EX3 - REMOTE CONTROL Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi RC-EX3 - REMOTE CONTROL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info