Bedienungsanleitung Mitsubishi RC-EX3 - REMOTE CONTROL (Seite 35 von 46) (Englisch)

805477

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

−33−−32−

Acknowledge screen for the completion of setting is displayed.

To change other ﬂap motion ranges, tap the Yes button. (☞3)

To terminate the setting, tap the No button. The display returns to the TOP screen.

10 Acknowledge screen for the ﬂap

motion range is displayed.

Flap❷ setting is completed

Tap [No] to return to top screen.

Yes

Setting the range of flap❷

motion is complete.

Do you want to set other ﬂaps?

Flap❷ Swing range

Back

Tap [Back] for resetting.

Yes

Do you want to set the

range of ﬂap motion?

If yes, tap [Yes].

Advice

When the unit is installed within 50 cm from a wall, it is recommended that you change the range

of the left/right ﬂap motion as follows:

・ When installed at the right end of the wall

Left/right ﬂap motion range 1 to 4

・ When installed at the left end of the wall

Left/right ﬂap motion range 2 to 5Installed at

the left end Installed at

the right end

Anti draft setting (for using panel with anti draft)

1 Tap the Menu button on the TOP screen and select Useful functions ⇒ Anti draft setting .

When one IU is connected to the R/C: ☞3

When two or more IUs are connected to the R/C: ☞2

■ Depending on how the Permission/Prohibition setting is set, the administrator password input screen may be displayed.

2 When two or more IUs are

connected to the R/C, a list of IUs is

displayed. Tap the IU to be set.

You can enable/disable the motion of panel with anti draft for each blow outlet for each operation mode.

■When the R/C is set as the sub R/C, the anti draft setting cannot be set.

IU select

Next Back

Select an IU address.

・Anti draft setting should be set while the unit is stopped.

・ When you perform Anti draft setting while the unit is in

operation, the acknowledge screen for unit stop is

displayed.

Advice

3 Select the blow outlet number to set anti draft.

■ The ﬂap at blow outlet No. ① will keep moving while the blow outlet selection screen is

displayed. Select the ﬂap based on this ﬁgure. When you have selected the blow outlet,

the ﬂap with the number you selected will move. The ﬁgure displayed on the screen shows

the installed unit viewed from the ﬂoor side.

■You can set all blow outlets at once by tapping the Bat.set. button.

An icon that indicates the operation mode is shown on each blow outlet button.

When the anti draft setting is enabled, the icon color will be reversed (for example,

in the left gure, blow outlets which have the anti draft setting enabled during

cooling are numbers ①, ③, and ④).

Flap selection for anti draft setting

Bat.set. Back

Flap ❶ Is in operation

4 Select enable/disable for each

operation mode.

After you make the selection, tap

the Set button.

The display returns to the blow

outlet selection screen.

Anti draft setting mode setting

Set Back

Select the item.

DisableDry

DisableFan

DisableHeating

DisableCooling

Enable

The External ventilation screen is displayed.

If the Venti. ON button is tapped, the ventilation operation starts.

To stop the ventilation operation, tap the Venti. OFF button.

■In case that the Ventilation is set “Interlocking”, the ventilation operates interlocked with Run/Stop operation of air conditioner (refer to

Installation Manual).

1 Tap the Menu button on the TOP screen and select Useful functions ⇒ External ventilation .

■The ventilation operation is enabled in case that the External ventilation is set “Independent” (refer to the installation manual for details).

■In case that the External ventilation is set “Disable” or “Interlocking” the ventilation operation is disable.

Ventilation operation (when ventilation device is installed)

The ventilation is turned on or off if the ventilation device is installed.

External ventilation

Venti. OFF

Back

Select Venti. ON/OFF.

Venti. ON

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi RC-EX3 - REMOTE CONTROL Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi RC-EX3 - REMOTE CONTROL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info