Bedienungsanleitung Mitsubishi SKM25ZG-S (Seite 137 von 144) (Englisch)

664856

137

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

134

(1) Tools exclusive for R410A

a) Gauge manifold

• As R410A is characterized by high pressure, conventional tools cannot be used.

• In order to prevent any other refrigerant from being charged accidentally, each port of the manifold has been changed in

shape.

b) Charge hose

• As R410A is characterized by high pressure, the pressure resistance of the charge hose has been increased. The material has

also been changed to an HFC resistant type, and, as in the case of each port of the manifold, the hose cap size has been

changed. Furthermore, for prevention of gas pressure reaction, a charge hose with a valve placed near the cap is also avail-

able.

c) Electronic balance for refrigerant charging

• As R410A belonging to the HFCs features high pressure and high evaporating speed, when R410A is charged by using a

charging cylinder, R410A in the cylinder cannot be kept in a liquefied state and gasified refrigerant bubbles in the charging

cylinder, it becomes difficult to read values. Therefore, it is advisable to adequately use an electronic balance for refrigerant

charging.

• An electronic balance for refrigerant charging has higher strength due to its structure with four points of support for refrig-

erant cylinder weight detection. As the charge hose connecting part has two ports-one for R22 (7/16 UNF 20 threads per

inch) and the other for R410A (1/2 UNF 20 threads per inch) - it can also be used for charging the conventional refrigerant.

•Two types of electronic balance for refrigerant charging are available - one for 10kg cylinder and the other for 20kg cylinder.

Electronic balance for 10kg cylinder precision ± 2g

Electronic balance for 20kg cylinder precision ± 5g

• Refrigerant is charged manually by opening/closing the valve.

d) Torque wrench (for nominal diameters 1/2 and 5/8)

• Along with changes in flare nut sizes for enhanced pressure resisting strength, torque wrenches for R410A differ in opposite

side size.

Table 11. Differences between conventional high/low pressure gauges and those for R410A

Conventional gauges Gauges exclusive for R410A

High pressure -0.1~3.5MPa -0.1~5.3MPa

gauge (red) -76 cmHg~35 kgf/cm

-76 cmHg~53 kgf/cm

Compound -0.1~1.7MPa -0.1~3.8MPa

gauge (blue) -76 cmHg~17 kgf/cm

-76 cmHg~38 kgf/cm

Table 12. Differences in port size between conventional manifold and that for R410A

Conventional manifold Manifold for R410A

Port size

7/16 UNF 1/2 UNF

20 threads per inch 20 threads per inch

Table 14. Differences between conventional wrenches and those for R410A

Conventional torque wrench Torque wrench for R410A

For 1/2 (opposite side 24mm × 55N·m 26mm × 55N·m

× torque) (550 kgf·cm) (550 kgf·cm)

For 5/8 (opposite side 27mm × 65N·m 29mm × 65N·m

× torque) (650 kgf·cm) (650 kgf·cm)

Table 13. Differences between conventional charge hose and that for R410A

Conventional charge hose Charge hose for R410A

3.4 MPa (34 kgf/cm

) 5.1 MPa (51 kgf/cm

)

17.2 MPa (172 kgf/cm

) 27.4 MPa (274 kgf/cm

)

Engineering material NBR rubber

HNBR rubber

internally coated with nylon

Cap size

7/16 UNF 1/2 UNF

20 threads per inch 20 threads per inch

Pressure

resistance

Normal pressure

Breaking pressure

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi SKM25ZG-S Seite 137

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi SKM25ZG-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info