Bedienungsanleitung Mitsubishi WD-52525 (Seite 42 von 108) (Englisch)

475284

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Add Screen

Figure 14

Select “Add” from the Edit NetCommand screen, and

the New Device screen will display. Select the Device

type that you would like to add. You may add your

A/V receiver (if not added in Initial setup) Cable Box,

Camcorder, DBS, DVD, Laser Disc, PC and VCR.

At the next screen, choose the manufacturer. If you

choose “Other” for the manufacturer, the device (A/V

receiver, Cable, DBS, DVD or VCR) can be learned.

For device types Laser Disc, Camcorder, Game

and PC, the “Learn” screen is skipped. There is no

NetCommand support or learning for these devices.

At the next screen, you can keep the default Name or

select a custom Name for the device, using ADJUST

or to select letters A-Z, numbers 0-9, and/or

symbols (!.&’/:*- and blank) for each character of the

name you would like for the selected channel.

The next screen displays the Connection screen

(RF Connection for Cable, Figure 21). Select the TV

and A/V receiver inputs that the device is connected

to. Connecting only audio to the A/V receiver is

recommended. The A/V receiver may need configuring

for digital audio.

Figure 14. Add screen

Edit NetCommand

, Add Devices

Edit NetCommand Screen

Figure 13

If you selected Edit when you were at the Finish screen,

the Edit NetCommand screen displays. There are five

possible choices from this screen. They are:

Add:

Add a new device to the NetCommand setup. See

Figure 14 for more information.

Change:

Change the brand/model or input connections of a

device already listed in the configuration. Learn the

remote control signals of devices listed as “Other”

brands. See Figure 23 for more information.

Review:

View a list of all devices and input connections in the

NetCommand home theater configuration. This is

also where you can turn On or Off unused TV inputs or

devices. See Figure 4 for more information.

Delete:

Remove a device or erase the complete NetCommand

home theater configuration. The learned remote

control signals are erased when the associated device

is deleted. See Figure 25 for more information.

Initial:

Start the setup at the beginning. This button only

becomes available after deleting the complete

configuration, or if NetCommand was not set up when

the TV was first powered On. See Figure 2 for more

information.

Mitsubishi’s NetCommand allows you to edit your home theater configuration. You can add new devices, change

device settings and connections, delete devices and learn remote control IR signals not already in NetCommand

memory.

Figure 13. NetCommand Menu, Edit NetCommand Option

Use these settings to change the NetCommand setup

to reflect a change in your home theater system. To

learn the remote control IR signals of a device that

is not already in the NetCommand memory, add this

device as manufacturer of “Other”. The learning

screens will then automatically be included in the

series of screens used for adding the device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-52525 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info